fiestaturbo.com

[dangerousdave]

yes mate i was the last person to post in september lol

and i think he must of used the fiesta iscv too!!

but the fact it lasted 4 days aint to good! lol!!


well i think ill take the inlet back off in the week and make the frst bits fit!

[black2]

Did'nt it fail due to the rings not being gapped correctly though? Not because of the inlet manifold???

Gareth.

[dangerousdave]

ive not regapping mine! lol only want it to last a year max!! lol only on low boost too 7-10psi i want to upgrade it all as the year goes on!

well im ether using a frst inlet now, or making the fiesta tb and iscv fit the 16v inlet! and if it doest work still ill be using it n/a!!

[richie baby]

when u sorting this bad boy out then dave

[dangerousdave]

going to whip the inlet off tomorrow dude! you coming up?? might even have a look at whats needed to fit that rover inlet cuz ill have more room then!...... im still thinking about that custom fuel rail too what i linked you too last week!!

also had a quote back for megasquirt 2 from the uk setup for the vw coil on plug using setup for wasted spark £355 +£10 delivery!

[black2]

Keep us posted with how it goes mate.

Gareth.

[dangerousdave]

will do mate hows yours coming along? done anything this week?

i have a few questions from today here..... zetec-breathing-system-help-required-vt181899/

how have you plumbed in your breathers on the n/a zetec or do they all go into the front one on yours?? cheers

dave

[black2]

Ive replied to your thread chap,

Gareth.

[crazycage]

going to whip the inlet off tomorrow dude! you coming up?? might even have a look at whats needed to fit that rover inlet cuz ill have more room then!...... im still thinking about that custom fuel rail too what i linked you too last week!!

also had a quote back for megasquirt 2 from the uk setup for the vw coil on plug using setup for wasted spark £355 +£10 delivery!

the vw coil on plugs are really poor mate use somthing else

[dangerousdave]

ok bud cheers, i have heard diffrent things now some say there crap some say there good because they have ignitors in them and can be run as wasted spark setup from ms2?? lol

may keep an eye out for some duratec ones then??

[dangerousdave]

been up to the car today and took the compleate inlet off to look at, and decided to do as heeman did on his and im going to draw up the inlet gaskets of both cars and try and make an adaptor as i cant be arsed to mess about any more, and it seems heeman managed a good figre with his and it ran fine! !! lol

so it wil do for mine too until i go for more power and better management in the future!!

[richie baby]

have u done it yet i want one two il buy the gear if u make it

[dangerousdave]

have u done it yet i want one two il buy the gear if u make it

sounds good to me buddy! a meter of half inch by 3 inch 6262 alloy( or what ever you can get)! lol and a cvh inlet gasket! ill speek to my old boss and get him to order it when i got some dosh!

[richie baby]

u dont need dosh il get the gear,
sort it out

[dangerousdave]

ok ill pop in monday when i thinks he will be back! ill go halfs mate as it will prob be dear!!

[richie baby]

got ur gear yet marrow, ps u got my mr2 turbo gearbox out yet

[dangerousdave]

got ur gear yet marrow, ps u got my mr2 turbo gearbox out yet

still gotta draw it up marrow! going up to the car tomorrow to get the inlet and my vernier as i should be getting a cad program tomorrow! you working saturday? we will have to go get it out then or sunday?? wont take 10 mins

[dangerousdave]

well not been to the car as its too cold at the min.. lol so ive been drawing up some inlet spacers and adaptors on cad ready to hopefully machine next week





and also knocked up a bracket to hold my e36 bmw battery distrubution teminal thingy!





needs a fettle and a paint but will look ok when its on

thats about it till next week when hopefully it will be running with the frst manifold

[black2]

Looking good chap.

So i presume you can load that file into a machine and it will follow the dims to make the plates?

When this is done you must nearly be there then? Still way ahead of me, now im back at work I dont hardly have any time to get to the engine . Only things really for me left to do is fit the inlet, get an intercooler and a chip from MSD. oh and fit it in the car lol.

Gareth.

[dangerousdave]

ha ha lol, im going to use the 195 chip lol, may get it reflashed if i need too!?

well you offset the lines by the radius of the tool you want to use unill the size is the same as the material your cutting then basiclly a few presses of the mouse and its all set, find a datum point and off she goes!

had another little play trying to be cleaver earlyer and came up with a 3d (ish! wish i knew the real way to do it ) one




might try and figure out how solidworks operates soon!

dave

[black2]

That machine sounds good mate.

Its probably a good idea to get a proper chip done as a zetec turbo is quite a bit different to a 1600 cvh turbo. Im going to get mine from MSD.

I ve bought some sheet ally now as well just so i can knock out a plate to fit the frst tb, hope to make it this weekend.

Do you have any updates for us?

Gareth.

[Ruishy1]

where do you get solidworks mate ?
tryed downloading it but kept getting virus's
got an inlet flange i need made up

[dangerousdave]

i used bobcad 19 mate really simple to use! got solidworks downloading now! if your scanner is locating a virus its more than likly the keygen or crack!

[Ruishy1]

quite possibly, il have another go

[jayrs]

looks like progress is coming on nice mate

[Ratspeed]

Good work on the plates chap

[richie baby]

we need a update for this dave.

[dangerousdave]

cheers lads still waiting for some machine time! then when she runs shes going in the new lock up me and richy baby have aquired with 2 other mates to finish the rest of the work hopefully in time for fitp! , we going up sunday marrow? need to swap any more mr2bits over?

[richie baby]

only need to change me bucket seats over, and too take off oil gauge got to do it soon as someone might be having it.
still not sure if to keep it for parts but its to good to break up.
oh yeah crack on with ur car aa.
u can borrow my t3 if u want for now.

[dangerousdave]

sounds like a plan buddy! and bottom boost hose! lol

you wanna get the seats you had in it put back in and get them recaros retrimed there pretty rare aint they??

[black2]

Got to be time for an update Dave?

Gareth

[dangerousdave]

waiting for the cnc miller to get some downtime mate!

got the focus on the road running pretty sweet now tho! will update that when i get a working keyboard! lol this onscreen one is too slow

[black2]

Sweet. Did'nt take long to sort that focus either, good work.

Gareth.

[dangerousdave]

Sweet. Did'nt take long to sort that focus either, good work.

Gareth.

well see what mot man says in 3-4 weeks lol needs a wishbone still, doing a full service thiss week too as i think its been topped up with cheep thick oil

[dangerousdave]

well not much of an update but ive had a change of plan slightly .....involing making this fit






its a rover 220 turbo inlet anyone have any info on the injectors? theres mjy10023 or d3181gb lol i have been told ther 480c injectors but i think there around 230cc??

also aquired a difrent fpr now with an exta outlet or a gauge now too




so im going to alter my drawings to fit this i think if i manage to fit the iscv and tb to it ok should b pretty good hopefully