fiestaturbo.com

[pauldolman]

is that in March's issue mate. or an old one

no pal it's in the march 09 issue, out in the shops now

[FRSJON]

nice one paul... ..hope to see it used in anger one day.. the noise it made on the rollers was awesome....

[pauldolman]

cheeRS jon, maybe sooner than u think

[andymcd]

thats 1 of my fav frst's mate
what spec is the engine?

[Minstral]

is that in March's issue mate. or an old one

no pal it's in the march 09 issue, out in the shops now

Nice mate look forward to reading it

[M1K3Y_B]

Flicked through the magazine earlier and saw the pics of your car, looked good

[pauldolman]

thats 1 of my fav frst's mate
what spec is the engine?

cheeRS

engine spec -

1.6 litre 8 valve engine fully rebuilt - new oversized pistons 0.5mm,new piston rings,new big & small end bearings,balenced crank, reseated valves, new valve guides, new valve stem seals, kent cvh35 camshaft with origional ford lifters, ported & polished head, uprated head gasket, uprated air filter, grs custom intercooler(60mm core) & rad, cossie t3 turbo - 4x4 compressor housing, 4x4 compressor wheel, T3 back plate, 360 degree thrust bearing, twin adjustable seals, .48 exhaust housing. scorpion s/s exhaust system with a 4 inch rolled tailpipe, L6 cossie manangement with a wasted spark driver in the ecu to run coilpack, custom inlet manifold, tubular stainless exhaust manifold, bailey swirl pot, header tank & oil seperator, samco blue silcone hoses,ap paddle clutch, chrome/polished engine detailing.

shore a few bits have been left out but that should be most of it for u

[andymcd]

good spec mate
what power is it running?

[pauldolman]

good spec mate
what power is it running?

as above andy -

engine spec -

1.6 litre 8 valve engine fully rebuilt - new oversized pistons 0.5mm,new piston rings,new big & small end bearings,balenced crank, reseated valves, new valve guides, new valve stem seals, kent cvh35 camshaft with origional ford lifters, ported & polished head, uprated head gasket, uprated air filter, grs custom intercooler(60mm core) & rad, cossie t3 turbo - 4x4 compressor housing, 4x4 compressor wheel, T3 back plate, 360 degree thrust bearing, twin adjustable seals, .48 exhaust housing. scorpion s/s exhaust system with a 4 inch rolled tailpipe, L6 cossie manangement with a wasted spark driver in the ecu to run coilpack, custom inlet manifold, tubular stainless exhaust manifold, bailey swirl pot, header tank & oil seperator, samco blue silcone hoses,ap paddle clutch, chrome/polished engine detailing.

power - 223.9bhp @ 219.1lbtq

shore a few bits have been left out but that should be most of it

[pauldolman]

upadte

picked up my chromed bits for the cage, look a lot better



cage





mirrors





stage 3 big valve head fitted today





































all back together now, still have a few teething issues the exhaust manifold gasket is blowing which should just need retightening evenly when cold and it need a cam tenichioner it's wighning away and a new temperture sender as the temperture is reading way hotter than it's actually running

we ended up as well as fitting double valve springs, solid lifters my old kent cam was showing signs of wear so we put a new newman cam in as well, what a day

[rsonblackwheels]

very cool, like the new cage bits

newman cam

[pauldolman]

very cool, like the new cage bits

newman cam

cheeRS mate, yes newman cam also

[JamieFRST]

Nice spec on the engine, are you getting on the rollers soon? would be interested to see what the stage 3 head and newman cam adds.

[pauldolman]

Nice spec on the engine, are you getting on the rollers soon? would be interested to see what the stage 3 head and newman cam adds.

no plans yet jamie but would be nice at some point to see if it's made any difference at all

[pauldolman]

a few pics simon(smo) took on the m1 going up to ford fair LOL

[MENACE]

car is looking sweet mate.should be running a good bhp now with the new head and cams get it on the rollers

[FRSJON]

love the pics paul ,looks mean as fook from the front... shame its not a red one.... joking...

[jayrs]

looking sweet mate

its just reminded me about the mirror looking at your pic's, i completely forgot about it sorry mate

[Smo]

a few pics simon(smo) took on the m1 going up to ford fair LOL

Haha, not me, Paul, was Steve (bakewell001) - I daren't take the credit or he'll moan at me

Although I did take the static ones

Car's looking great though and will be interesting to find out what it's running now with the new bits fitted!

[pauldolman]

Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

[FRSJON]

very nice....

[pauldolman]

[jayrs]

very nice mate, and very brave! i would hate to try and keep them clean!

[pauldolman]

cheeRS mate, i know but for the visual imnpact it'll be worth it

[jayrs]

agreed mate!

[Luke2008]

Excellent stuff mate, keep us updated as you go. Luke.

[pauldolman]

Excellent stuff mate, keep us updated as you go. Luke.

will do pal

[Dave G fsi]

Awesome mate, cant wait to see them fitted

[pauldolman]

Awesome mate, cant wait to see them fitted

cheeRS mate

[pauldolman]

just filled up the cooling system and it's coming out of the swirl pot like a tap, the seal that allows my sensor for my kenlowe fan had deterated and broke when the old hoses came off, i was hoping i could get away with it until i could pick one up but the way it's coming out i'm not even going to attempt to start it with out it being replaced, burton sell them for £1.04 and are not open on bank hoildays how anoying is that

[FRSJON]

looking good paul... shame about the leak..

[pauldolman]

leak all sorted and back on the road

engine bay with new hoses

[Dave G fsi]

Looking awesome mate

[pauldolman]

Looking awesome mate

cheeRS pal

[chrisxr2it3]

looks really good mate sets the bay off really well much better than the blue like it alot