fiestaturbo.com

[Minstral]

y didnt u just band the wellers. look better than the fiesta steels

[EUFez]

y didnt u just band the wellers. look better than the fiesta steels

I was gunna sell the Wellers. Thinking about it now LOL!

Can't wait to put the coily's on.

[pjdj1989]

Gaz don't go that low..

[Minstral]

Gaz don't go that low..

if you get the right ones they do mate. had some on my mk3 si was very low and on 15's with a lot of adjustability left

[EUFez]

Gaz don't go that low..

if you get the right ones they do mate. had some on my mk3 si was very low and on 15's with a lot of adjustability left

Please don't say that... They cost me alot of money! Ahaha

But apprently they do go low, we'll see.

[Stuartcarvell]

Just spotted these!
http://cgi.ebay.co.uk/Ford-13-Banded-St ... _500wt_949
Stuart

[martynkeep]

Ahhhh you got coilies
Good man
Once i've had my MOT my coilies shall be going on aswell
Red Mk3's kick ass

[EUFez]

Ahhhh you got coilies
Good man
Once i've had my MOT my coilies shall be going on aswell
Red Mk3's kick ass

[jonyb4]

them banded steels in the link are class!, pitty they'd not fit over my brakes or id get them

[EUFez]

Bought ANOTHER set of wheels this week. Picking up this weekend, cannot wait!

There Compomotives, CX Alloys. 13x7J front, and 13x8J rear. They need refurbing but there awesome wheels, got the tyres ready to fit and stretch on.



When cleaned up and sprayed!



Obviously going to have to roll the arches a tad on the front and get JDM arches or some sort of custom arches fitted to the rear. Wether they'd be smoothed in or not, I don't care, I just can't wait to fit them. Uhhhhhhh yeaaah! Ahahaha

[EUFez]

Oh yeah and still awaiting the brand new Gaz coilovers to come... Been over 3weeks now, obviously they have to make them and it does say it takes up too 3 weeks for them to be made up but I'm getting impaient. LOL!

[Minstral]

if i wasnt going to run big bigger brakes id have some small and wide wheel by now
love the old skl comps

[EUFez]

Mate what's wrong with you? It's all about low and wide. 13's all the way!

Cheers pal.

[luke_mk3_st]

Oh yeah and still awaiting the brand new Gaz coilovers to come... Been over 3weeks now, obviously they have to make them and it does say it takes up too 3 weeks for them to be made up but I'm getting impaient. LOL!

same here mate been 3 weeks for me today and still waiting! all because i needed a differnt spring rate for the front!

[Minstral]

Mate what's wrong with you? It's all about low and wide. 13's all the way!

Cheers pal.

i just need 15's that are wide lol and still low

[3lward]

Front arches should be fine on a 7j wheel, mine are.
might have problems with the rear being a 8j, are they RWD offset? as i get bad scrubbing on the back with a stripped out rear interior and Gmax uprated shortened shocks and springs, but some of that is down to having quite big tyres lol

[jonyb4]

The down side of having escort and capri wheels mate, they're both rwd

[EUFez]

Oh yeah and still awaiting the brand new Gaz coilovers to come... Been over 3weeks now, obviously they have to make them and it does say it takes up too 3 weeks for them to be made up but I'm getting impaient. LOL!

same here mate been 3 weeks for me today and still waiting! all because i needed a differnt spring rate for the front!

Glad I'm not the only one. I've had to wait ages because Mk3.5 front hubs are different from Mk3. Bummer... Ringing him today to give me an update on how there doing.

[EUFez]

Mate what's wrong with you? It's all about low and wide. 13's all the way!

Cheers pal.

i just need 15's that are wide lol and still low

What wheels you planning on getting?

[EUFez]

Front arches should be fine on a 7j wheel, mine are.
might have problems with the rear being a 8j, are they RWD offset? as i get bad scrubbing on the back with a stripped out rear interior and Gmax uprated shortened shocks and springs, but some of that is down to having quite big tyres lol

True. Just need to roll the fronts because Police round my area give me grief for having 7j on the fronts.

[EUFez]

The down side of having escort and capri wheels mate, they're both rwd

I think they are rwd drive offset yeah, but I don't mind. There awesome!

[Minstral]

Mate what's wrong with you? It's all about low and wide. 13's all the way!

Cheers pal.

i just need 15's that are wide lol and still low

What wheels you planning on getting?

nothing planned i just want some really nice wheels, want to find some different rims that you dont usually see, dont have to be wide just look hot

[3lward]

Front arches should be fine on a 7j wheel, mine are.
might have problems with the rear being a 8j, are they RWD offset? as i get bad scrubbing on the back with a stripped out rear interior and Gmax uprated shortened shocks and springs, but some of that is down to having quite big tyres lol

True. Just need to roll the fronts because Police round my area give me grief for having 7j on the fronts.

Law states that the TRED has to be inside the arch line not the sidewall. stretched tyres are done for that reason not just to look cool

[luke_mk3_st]

Oh yeah and still awaiting the brand new Gaz coilovers to come... Been over 3weeks now, obviously they have to make them and it does say it takes up too 3 weeks for them to be made up but I'm getting impaient. LOL!

same here mate been 3 weeks for me today and still waiting! all because i needed a differnt spring rate for the front!

Glad I'm not the only one. I've had to wait ages because Mk3.5 front hubs are different from Mk3. Bummer... Ringing him today to give me an update on how there doing.

ye probably my problem aswell then, as mine are 3.5 ones to aswell as having a differnt spring. dont realy get whats taking so long tho!

[EUFez]

Cheers pal.

i just need 15's that are wide lol and still low [/quote]

What wheels you planning on getting?[/quote]
nothing planned i just want some really nice wheels, want to find some different rims that you dont usually see, dont have to be wide just look hot [/quote]

Fair enough. Remember though we are coming into Fordfair 2011 scrapping in!

[EUFez]

Front arches should be fine on a 7j wheel, mine are.
might have problems with the rear being a 8j, are they RWD offset? as i get bad scrubbing on the back with a stripped out rear interior and Gmax uprated shortened shocks and springs, but some of that is down to having quite big tyres lol

True. Just need to roll the fronts because Police round my area give me grief for having 7j on the fronts.

Law states that the TRED has to be inside the arch line not the sidewall. stretched tyres are done for that reason not just to look cool

Very true! Totally agree with that... I'm preffered for there questioning don't you worry!

[EUFez]

Yeah - Hate that it takes soo long as I have cut springs at the moment and I'm hating it! Ride is awful after a while LOL!

But the wait will be worth it I guess, slam it. Take the helper springs out boyo!!!

Picking up the wheels over the weekend, got the tyres in the shed. Just bought some custom fibreglass arches, wide! Prepared for it all. Updates to follow...

[jonyb4]

oooo

[EUFez]

Great news! Coilovers are coming early next week, can't wait to fit them.

Here's the arches I've bought:

[jonyb4]

so you'll be cutting part of the metal arches back and bonding it on and glassing over them drill spots?

[MK2 Jamie]

F*ck bonding them on. Rivets ftw, proper motorsport style.

[EUFez]

Exactly my thoughts Jamie. Rivet FTW! Would love the rivets black to match the roof but dunno wether that's possible?

Anyone wanna help me fit them at some point? Dunno what I'm doing exactly and don't wanna c*ck up. Lack of tools also.

[EUFez]

Gave the bay a good clean today with some Gunk. Not the best of cleans but looks better...

[3lward]

Heat soak Yo! lol only kidding

you gonna colour code the arches?

[trecoll]

http://cgi.ebay.co.uk/compomotive-cx-wh ... 20b4a831e6



They will look nice though...