fiesta RS free to collector!
30 posts • Page 1 of 1
You can wish, the grey one must go to make room for project 2001
taxed, moted, 1300cvh engine, k&n, electric windows ,remote c/l, front and rear strut braces,white dials,lowered, full peco xr2i zorst, cozzie bumper, twin lamps, xr2i 16v trim, rs 2000 15"alloys, many frst parts, loads of other bits and bobs, chaep tax and insurance.Over £7000 spent on the car. you saw it at fitp well you can now own it £1500ono call or text me on 07855832162.
its not you average fiesta!
Xr or Rs i need one in my life!!!!
<font size=-1>[ This Message was edited by: rs bob on 2001-06-01 21:00 ]</font>
<font size=-1>[ This Message was edited by: rs bob on 2001-06-15 22:13 ]</font>
taxed, moted, 1300cvh engine, k&n, electric windows ,remote c/l, front and rear strut braces,white dials,lowered, full peco xr2i zorst, cozzie bumper, twin lamps, xr2i 16v trim, rs 2000 15"alloys, many frst parts, loads of other bits and bobs, chaep tax and insurance.Over £7000 spent on the car. you saw it at fitp well you can now own it £1500ono call or text me on 07855832162.
Xr or Rs i need one in my life!!!!
<font size=-1>[ This Message was edited by: rs bob on 2001-06-01 21:00 ]</font>
<font size=-1>[ This Message was edited by: rs bob on 2001-06-15 22:13 ]</font>
- si bob
- Two Star Idiot...

- Posts: 255
- Joined: Thu Jan 01, 1970 1:00 am
- Location: birmingham
- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
maybe you could break it (or is that too painful??
), i know that i'd be interested in a lot of the parts as i have a grey fezzy! dunno if you'll make the £1500 up but i reckon you'd be close! let us now if you do, and i'll have both bumpers and the c/l off ya, maybe the zorst too!
- Rob1.6s
- Boy Wonder

- Posts: 621
- Joined: Tue May 01, 2001 1:00 am
- Location: Milton Keynes
I have to admit, thats quite a lot of motor for the money, how much mileage and history etc, get back to us asap. Could be v.interested! just post it here cos i check the board every day.cheers
5 doors that will have a lotta difference next year!!
- matthewhignett
- Senior Poster

- Posts: 340
- Joined: Thu Jan 01, 1970 1:00 am
- Location: the land of porn
yeah i think so, the one [ERRR] red mud flaps, monwipe etc...... mileage, is that a new/rebuild or genuine, ???and dents etc?
5 doors that will have a lotta difference next year!!
- matthewhignett
- Senior Poster

- Posts: 340
- Joined: Thu Jan 01, 1970 1:00 am
- Location: the land of porn
bollo(ks, i wanting it for my girly, she would have loved it down to a tee!, oh well, spork happens!, at the end of the day if it sold its sold!cheers mate
5 doors that will have a lotta difference next year!!
- matthewhignett
- Senior Poster

- Posts: 340
- Joined: Thu Jan 01, 1970 1:00 am
- Location: the land of porn
- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
That's right lad's and lasses, from Monday evening (11th June 2001) I will be the new owner of Rob's beautiful 1.3 Sorted Festa.
Let the modding begin!!!
Let the modding begin!!!
Matt.
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
- Matt_Steves
- Elite Post Master

- Posts: 1058
- Joined: Sat Jun 09, 2001 1:00 am
- Location: Northampton
- Phil Si
- Crack Smoker Of The Year 1999


- Posts: 7074
- Joined: Thu Jan 01, 1970 1:00 am
- Location: South Yorkshire
Car: 2000 BMW 330 Ci
Phil I have a list as long as my arm of things to mod on it so don't you worry, I'll be quite busy. ONCE I've paid off the loan for the car 
Matt.
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
- Matt_Steves
- Elite Post Master

- Posts: 1058
- Joined: Sat Jun 09, 2001 1:00 am
- Location: Northampton
phil and matt are you both going to ford fair hopefully if i will have passed but if i havent im hopeing to get robs old man to take my car

- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
yeah give it to my girl, dont mean she is allowed to drive it, at the end of the day, it woudl be ideal, she has a garage, I leave ti there, just for show use, she woudlnt knwo how ti look after a motor like that, I aint insane, if she got behind teh wheel, I would cry, thats y 3 weeks ago I let her buy a vauxhall,its only a matter of time b4 she crashes i and ghet another heap of vauxhall crap off the road. Anyway it dont matter what I would have done [ERRR] it cos someone else had got it!
5 doors that will have a lotta difference next year!!
- matthewhignett
- Senior Poster

- Posts: 340
- Joined: Thu Jan 01, 1970 1:00 am
- Location: the land of porn
you got the motor yet then mate, by the way fiesta boy, r u askign what I have doent o my fezzer or what I would have doen to robs one? I woudl have left robs one alone, its sorted mate! So we all gong to ford fair, phil/fiesta boy, u going on the stand???
5 doors that will have a lotta difference next year!!
- matthewhignett
- Senior Poster

- Posts: 340
- Joined: Thu Jan 01, 1970 1:00 am
- Location: the land of porn
Well I got Rob's motor on Monday night (late) and so far I have:
Cleaned the engine up,
Fitted yellow silicon spark leads,
Change the wiper parking to the side and blade length so it don't go over the rubber,
Installed my head-unit (but not the rest!),
Replaced the plunger to detect the bonnet being lifted,
Got rid of those nasty Max Power and Fast Ford stickers.
I am having a problem as the car is pulling to the left when lifting off high acceleration and is rubbing quite badly. When I took the front wheels off I also found that the front discs need replacing. The front wheels are also rubbing on the arch liner and have now worked their way through to the metal, so I'm gonna have to raise the car up (especially at the back) to avoid this in the future.
RS Bob (Rob) should be sorting me out with another driveshaft very soon and if you read this Rob get on the case!!!
Cleaned the engine up,
Fitted yellow silicon spark leads,
Change the wiper parking to the side and blade length so it don't go over the rubber,
Installed my head-unit (but not the rest!),
Replaced the plunger to detect the bonnet being lifted,
Got rid of those nasty Max Power and Fast Ford stickers.
I am having a problem as the car is pulling to the left when lifting off high acceleration and is rubbing quite badly. When I took the front wheels off I also found that the front discs need replacing. The front wheels are also rubbing on the arch liner and have now worked their way through to the metal, so I'm gonna have to raise the car up (especially at the back) to avoid this in the future.
RS Bob (Rob) should be sorting me out with another driveshaft very soon and if you read this Rob get on the case!!!
Matt.
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
- Matt_Steves
- Elite Post Master

- Posts: 1058
- Joined: Sat Jun 09, 2001 1:00 am
- Location: Northampton
matt the front liners are worn from when the car had orion injection 195/65/14 on they were a to high profile. the rears never had a problem as they have got 9.5mm spacers to miss the shocks. The way to cure this is to fit bumpstops to the front. Or the best way is to fit 195/45/15s as this is supposed to be the biggest you should fit to fiestas. But to be rubbing out of the body you are driving it FECKING HARD as we did fitp four up fully loaded accros ground with no problems even over speed bumps never had a problem.
- M K
- Senior Poster

- Posts: 350
- Joined: Wed May 09, 2001 1:00 am
- Location: B,HAM
P.S The car dont need discs i know that i fitted them three years ago myself and the car has only done 10k since. New pads have only been fitted about 2k ago. The disc are ap lockheed racing. Not do-do as most fit. Needed to be when i had a turbo in it.
- M K
- Senior Poster

- Posts: 350
- Joined: Wed May 09, 2001 1:00 am
- Location: B,HAM
- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
We'll I seem to be getting a problem, its quite worrying, I want 4 people, sometimes 5 + a ton of ICE in my car with absolutely no rubbage! and I want to drive it hard.
With me in it I took it round a left corner not particularily hard and heard, with my own ears the rear passanger tyre bumping on the arch.
Maybe just have RS1800i springs on? They come with 15's in the first place don't they?
So they should look alright but I need to stop it catching.
I know the front discs need replacing as they have passed the marker and are now thinner than the out strip marker if you know what I mean.
ALSO when I take it around corners I hear something moving from left to right or vice versa in the back of the car, it's nothing in the boot [ERRR] it's totally empty and it don't sound very nice, what is it?
_________________
Matt.

<font size=-1>[ This Message was edited by: Matt_Steves on 2001-06-14 21:32 ]</font>
With me in it I took it round a left corner not particularily hard and heard, with my own ears the rear passanger tyre bumping on the arch.
Maybe just have RS1800i springs on? They come with 15's in the first place don't they?
So they should look alright but I need to stop it catching.
I know the front discs need replacing as they have passed the marker and are now thinner than the out strip marker if you know what I mean.
ALSO when I take it around corners I hear something moving from left to right or vice versa in the back of the car, it's nothing in the boot [ERRR] it's totally empty and it don't sound very nice, what is it?
_________________
Matt.

<font size=-1>[ This Message was edited by: Matt_Steves on 2001-06-14 21:32 ]</font>
- Matt_Steves
- Elite Post Master

- Posts: 1058
- Joined: Sat Jun 09, 2001 1:00 am
- Location: Northampton
rs 1800 only had 14'' weels you have 15'' i never heard any thing move from side to side ever
are you intreasted in a swap then p.s i also have frst recroes

are you intreasted in a swap then p.s i also have frst recroes
- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
Well whatever it is moves from left to right and vice versa in the back of the car somewhere the boot is totally empty so it's something to do with the suspension, it has to be.
I think I'm gonna leave the springs on the car but I'm either gonna get rock hard Spax or some of those things you put in the springs that you can get from DemonTweeks, they are rubber bits that stop the spring compressing too much.
I need to work out exactly where this sound is coming from.
Hey Fiesta Boy, I want FRST Recaro's badly if they are mint. I ain't gonna get rid of the springs but maybe we could arrange a part exchange?
I think I'm gonna leave the springs on the car but I'm either gonna get rock hard Spax or some of those things you put in the springs that you can get from DemonTweeks, they are rubber bits that stop the spring compressing too much.
I need to work out exactly where this sound is coming from.
Hey Fiesta Boy, I want FRST Recaro's badly if they are mint. I ain't gonna get rid of the springs but maybe we could arrange a part exchange?
Matt.
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
XR2 Engine
Leather Interior
AP 4-Pots
Koni/Si Suspension
Fibreglass ICE Install
http://www.fiestaturbo.com/phpBB/photogallery.php?mode=viewgallery&u=691
- Matt_Steves
- Elite Post Master

- Posts: 1058
- Joined: Sat Jun 09, 2001 1:00 am
- Location: Northampton
the drivers seat has worn slightly on the piping but they all do that and im looking into geting it repaired

- fiesta boy
- One big spelling error...

- Posts: 5734
- Joined: Wed Jan 10, 2001 1:00 am
- Location: BIRMINGHAM DRIVE's 1 AND A HALF FIESTAS
for that price u are gettin alot of car for ur info, its got pretty much every mod under the sun
and its in mint condition,and done about 35k miles.... very good price IMO

and its in mint condition,and done about 35k miles.... very good price IMO
- Phil Si
- Crack Smoker Of The Year 1999


- Posts: 7074
- Joined: Thu Jan 01, 1970 1:00 am
- Location: South Yorkshire
Car: 2000 BMW 330 Ci
30 posts • Page 1 of 1

