tell me [ERRR] u think (new pics)
47 posts • Page 1 of 2 • 1, 2
tell me [ERRR] u think no bullsht just say [ERRR] u think of the car. it started off as a 1.0 pos(pice of sh!t) now its a 1.0pos with sum stuff stuk on it
standard engen 1.0 with split fire plugs.
bb4 exaust back box.
wheels oz saturn plus 7x15" on 195/45 rubber.
standard shox and 35mm puma springs.
fully debadged.
go faster strips removed mind u i might need them with this engen.
kenwood cd headunit (kdc5080r)
mosfet amp runing 390w mgx 8" subs
set of 6x9s (300w) and mids and tweets in the front. probly more bits and bobs but cant b assed jus now
xr2i kit on the way
_________________
bet this is faster than my 1.0 feesty
bbruu!
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-03 17:07 ]</font>






standard engen 1.0 with split fire plugs.
bb4 exaust back box.
wheels oz saturn plus 7x15" on 195/45 rubber.
standard shox and 35mm puma springs.
fully debadged.
go faster strips removed mind u i might need them with this engen.
kenwood cd headunit (kdc5080r)
mosfet amp runing 390w mgx 8" subs
set of 6x9s (300w) and mids and tweets in the front. probly more bits and bobs but cant b assed jus now
xr2i kit on the way
_________________

bet this is faster than my 1.0 feesty
bbruu!
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-03 17:07 ]</font>
- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
nice m8 almost like mine (GOT 2 get sum pics). just 1 thing. Strengthen up ur rear parcel shelf!! it looks like its gonna collaps.
<font size=-1>[ This Message was edited by: sphinx on 2001-12-30 18:27 ]</font>
<font size=-1>[ This Message was edited by: sphinx on 2001-12-30 18:27 ]</font>
- Sphinx
- Elite Post Master
- Posts: 8815
- Joined: Mon Nov 05, 2001 12:00 am
- Location: South Drives: depends on the week
- fiestakingfisher
- PurePower
- Posts: 7788
- Joined: Mon Jan 22, 2001 1:00 am
- Location: Hereford
- Your car: Fiesta 2.0 Kingfisher, BMW Z4
funny u should ask about the rust sphinx just got it sorted out rite i hope. there wiz a nice fist sizes hole at the bottom of the pasenger side arch and rusty around filla cap. got rid o rust pached and filled holes panted rear wing and waxoild all panels

- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
On 2001-12-30 14:18, chubbs358 wrote:
... now its a 1.0pos with sum stuff stuk on it![]()
Snow??


It's got potential fella. Would look lovely as an FRST replica

<< I need to put something here, yer? >>
- Project
- fiftyoneCL
- Posts: 16261
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Getting outta the UK come hell or high water ;o)
Agree with project here.. Needs the "i/RS arches and skirts on to make it look reallly clean.
Also get an alarm if you don't already have one. or say bye to your system.
Also get an alarm if you don't already have one. or say bye to your system.
Car is back...
- AndyBlackFRST
- BANNED SELLER
- Posts: 13844
- Joined: Tue Jul 17, 2001 1:00 am
- Location: Surrey, UK
- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
got my body kits and startin wurk on it. its needin a bit o repair + i had 2 cut bolts off front bumper [ERRR] sum retard put them in the rong place on the casting ( would ya beleav not 1 was in the right place:rolleyes: ) so placed bumpa on 2 drill new holes for bolts
.
had 2 start cuting my back bumpa up [ERRR] the inside castin waz 2 big
also my amp stop wurkin on sunday
_________________
bet this is faster than my 1.0 feesty
<font size=-1>[ This Message was edited by: chubbs358 on 2002-01-22 17:28 ]</font>

had 2 start cuting my back bumpa up [ERRR] the inside castin waz 2 big



also my amp stop wurkin on sunday

_________________

bet this is faster than my 1.0 feesty
<font size=-1>[ This Message was edited by: chubbs358 on 2002-01-22 17:28 ]</font>
- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
- Wooly
- Elite Post Master
- Posts: 1152
- Joined: Mon Jun 25, 2001 1:00 am
- Location: Burton on Trent
there prity hard i get a bit o rubage in back arch but the roads on this island r REALY rouhg and got alot o dips. but they improved handeling loads they only cost me £44.50 from larkspeed for the full set and took me 2 and a haf hours to fit the lot on boxingday. sorry i duno how stif they r but dont get much role any more

- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
almost done must get spots n fogs for front bumper and mondeo spoiler on + lower strip on front bumper not on yet but it geting there all i need now is a engen transplant (i wish)
thanx to:
my dad for painting
my bro for helping 2 fit the kit
John for selling me the kit
iceman for seling me fiesta spoiler (not on yet), door cards and center consol
and pro sport for mondeo spoiler
and evry on ft.com for advice
and screw all you ppl that didnt help me at all
just kidin
doors b4 and after
_________________
bet this is faster than my 1.0 feesty
bbruu!
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-03 19:11 ]</font>
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-05 21:59 ]</font>




thanx to:
my dad for painting
my bro for helping 2 fit the kit
John for selling me the kit

iceman for seling me fiesta spoiler (not on yet), door cards and center consol
and pro sport for mondeo spoiler
and evry on ft.com for advice

and screw all you ppl that didnt help me at all

doors b4 and after


_________________

bet this is faster than my 1.0 feesty
bbruu!
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-03 19:11 ]</font>
<font size=-1>[ This Message was edited by: chubbs358 on 2002-02-05 21:59 ]</font>
- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
no shure how much iv spent
£50 body kit
£45 springs
£200 ish headunit
£600 wheels+tyers
£80 bb4 back box
£60 i think for mondeo spoiler (cant mind off top of head
£70 ish on spkers
£90 amp
probly other bits n bobs
oh yea car cost me £200
[ERRR] a wast ITS A 1.0
omg [ERRR] hav i done
£50 body kit
£45 springs
£200 ish headunit
£600 wheels+tyers
£80 bb4 back box
£60 i think for mondeo spoiler (cant mind off top of head
£70 ish on spkers
£90 amp
probly other bits n bobs
oh yea car cost me £200
[ERRR] a wast ITS A 1.0

omg [ERRR] hav i done


- chubbs358
- All Show And No Go!
- Posts: 1146
- Joined: Sun Dec 02, 2001 12:00 am
- Location: Orkney, Scotland
Nice work m8, keep it up the car is looking better and better
Dave

Dave
7 Years and on my 5th Car, Fiesta 1.1i, Saxo VTR 98bhp, Bmw 318is Coupe,C2 VTS and now a 1998 Toyota Supra 

- dr_blackman
- Elite Post Master
- Posts: 1923
- Joined: Mon Oct 22, 2001 1:00 am
- Location: Herefordshire
- chumkila
- Dirty Post Whore!
- Posts: 38186
- Joined: Sun May 06, 2001 1:00 am
- Location: RS1800.com - Home of the Zetec 16V
47 posts • Page 1 of 2 • 1, 2
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
Only five months late! After missing 2023 I made it to Ford Fair 2024, but various reasons mean it's taken …
Saturday, 4th January 2025 17:23
What's everyone driving these days? Anyone still have their Fiesta from back in the day? Maybe you've moved on to …
Thursday, 4th January 2024 07:23
Another blast from the past! Jason Ripp's RS Turbo from 2001. I wonder what happened to this car? A reg …
Tuesday, 2nd January 2024 16:52
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.