fiestaturbo.com

[FRSJON]

bin the flexy hose from your turbo to your filter mate , a friend of mine did the same and on boost the turbo sucked it into the compressor cost him a new gt35.
make a ally one or steel ect

love the car tho its right up my steet

cheers gary,did test it on a mates car as a quick fix from the intercooler to the inlet.. hit 6 psi and it blew it to bits only fitted it as its easy to route and im sure luke uses the same? not bad for £30 a metre!

[crazycage]

bin the flexy hose from your turbo to your filter mate , a friend of mine did the same and on boost the turbo sucked it into the compressor cost him a new gt35.
make a ally one or steel ect

love the car tho its right up my steet

cheers gary,did test it on a mates car as a quick fix from the intercooler to the inlet.. hit 6 psi and it blew it to bits only fitted it as its easy to route and im sure luke uses the same? not bad for £30 a metre!

im not sure if he does mate , how long till its out on track ?

[FRSJON]

bin the flexy hose from your turbo to your filter mate , a friend of mine did the same and on boost the turbo sucked it into the compressor cost him a new gt35.
make a ally one or steel ect

love the car tho its right up my steet

cheers gary,did test it on a mates car as a quick fix from the intercooler to the inlet.. hit 6 psi and it blew it to bits only fitted it as its easy to route and im sure luke uses the same? not bad for £30 a metre!

im not sure if he does mate , how long till its out on track ?

well theres still a fair bit to do but the hold ups money really.. realistically i cant see it out on track till next summer

[FRSJON]

done some work on the car today..started sorting the loom out which i had been putting off i dont want any wires visible in the engine bay so the main part of the loom is going down the inner wing.

so,wing off....





i enlarged the hole where the wiring for the side repeater goes through and run the loom through and down the wing...





and all the wires come out where the indicator is ...






also i made a peanel for the fuse box to mount to as the dash was cut down a bit too much



also wired wired up some shift lights..




bought a fuel pump mount but need to make a mount for that so it fits the floor



oh a pick just for jay

[jonboisescort]

looking awsome mate

[FRSJON]

cheers jon ,also three AP racing master cylinders i got for the pedal box..

[Turboboy67]

Good to see some more progress mate, you've had it a year now btw

Fingers crossed you'll be driving it next year

[FRSJON]

Good to see some more progress mate, you've had it a year now btw

Fingers crossed you'll be driving it next year

the best things take time to finish and cost a bloody fortune it will be at the shows next year working or not but i cant see the first start up being too far away...just loads of small jobs to do..emerald have sent me the base map so shouldnt be long now!!

[Dave G fsi]

Looking absolutely brilliant Jon, nice one

[Rs Adz]

this is going to be one of the best mk3 fiesta track cars i love it

[jonyb4]

looking very very very good jon, was nice speaking to you at combe earlier this year too, the car is very special!

[FRSJON]

cheers lads , big push to try and have it running before christmas

[jayrs]

looking good mate.

nice wing on the roof


what idea you got for the fuel pump mount?

[FRSJON]

looking good mate.

nice wing on the roof


what idea you got for the fuel pump mount?

either carbon/ally flat plate about 150 x 400 basically sitting bellow the whole fuel system just the level the floor out

[jayrs]

ah right i see mate, was gunna offer to make something up but i havent got any alloy that size.

although i might be able to get some through a mate of a mate if your stuck.
might be air craft grade though so unless sorted before hand will crack when bent, but i can find out what he can get and let ya know?

[FRSJON]

cheers jay but ebay is my friend £8 quid delivered will still need to pick your brain on some wiring though

[jayrs]

no probs mate

[robp-tt]

Looking proper mint jon, cant wait to see this at the shows next year

[FRSJON]

Looking proper mint jon, cant wait to see this at the shows next year

cheers mate,it will at as many as i can get too

[Excursion]

Superb build, Jon. I always look forward to the next update.

[BOBFRST]

Outstanding m8! That is mega & the quality is superb

CheeRS

BOBFRST


ELM_US gone but never forgotten

[- Danny Boy -]

Awesome stuff as always Jon

[FRSJON]

cheers chaps,much appreciated had a break from the car for a month or two but im back on it now!

[FRSJON]

a bit more done this weekend,fuel lines from bulk head to rail and regulator.. and the engine loom fitted





just have this little lot to sort now



also made the shelf for the fuel pump craddle

[Excursion]

Looking good Jon

[Fraggle]

Awesome work boss

[Turboboy67]

It's taking shape nicely mate

[FRSJON]

cheers chaps not sure if anyone noticed the wiper motor has been removed,now going sigle wiper...just cos its lighter the spare wiper arm hole has come in handy . shaun... remember i said i found some names removed from the seats? well it was steve perez who owns vodka kick,he rallies when not at work,spoke to him the other day..asked him about the seats and if there was any history to one of them having l.moya(carlos sienz co-pilot) writen under the cushion...he recons they came out of his ex works WRC mk1 focus...ex mcrae car

[jayrs]

nic emate, looking very tidy in the bay

you going to replace that top rad hose with a longer one at some point?

there was a guy in the wanted section that had a single wiper looking to swap for a normal one, i'll find it and pm you the link

[FRSJON]

nic emate, looking very tidy in the bay

you going to replace that top rad hose with a longer one at some point?

there was a guy in the wanted section that had a single wiper looking to swap for a normal one, i'll find it and pm you the link

top rad hose ? the one with the blue metal section in ? thats for my coolant temp sender to go in ..and that single wiper is already mine

[jayrs]

ah right fair enough

i thought it might of been for a senor, but for some reason i thought you put it in the stat housing

prob thinking of someone else

**EDIT**, just looked back in the thread, you did put a sensor in the stat housing

[Turboboy67]

shaun... remember i said i found some names removed from the seats? well it was steve perez who owns vodka kick,he rallies when not at work,spoke to him the other day..asked him about the seats and if there was any history to one of them having l.moya(carlos sienz co-pilot) writen under the cushion...he recons they came out of his ex works WRC mk1 focus...ex mcrae car

I remember us talking about it mate, but to find out it came from a McRae car is a bonus for sure

[jonyb4]

very nice, just noticed the satin floor is gorgeous

[FRST SILVER]

thats the nuts mate.

stunning motor

[FRSJON]

ah right fair enough

i thought it might of been for a senor, but for some reason i thought you put it in the stat housing

prob thinking of someone else

**EDIT**, just looked back in the thread, you did put a sensor in the stat housing

coolant temp sensor is in thermo housing,temp sender for the temp gauge is going in the hose