***MOONDUST FRST*** breaking!Updated 28/11/04
38 posts • Page 1 of 2 • 1, 2
***MOONDUST FRST*** breaking!Updated 28/11/04
Yes thats it ive started breaking it this weekend as some stuff has already provisionally sold, sad to do this but noone came up with a good enough offer for the complete car
Roll on the next Turbo wagon
2.1 16v turbo Engine,ecu,turbo,hoses,loom- SOLD
Stage 2 CTS box -SOLD
3" bore exhaust -SOLD
GRS intercooler- SOLD
FF lower arms- SOLD
Spec-R header tank- SOLD
AP clutch- SOLD
Kahn RSS 17"alloys with yoko/toyo tyres (E.cond and lots of tread)-SOLD
ESCOS front calipers with Rotor discs(280mm) and pagid fast road pads-SOLD
Nomad A pilar dual gauage holder-SOLD
PACE alloy rad(excellent condition for air cooled turbo's only)-SOLD
RS2000 rear disc conversion with FRST rear beam with power flex bushes and AP discs and pads Recon calipers and modded handbrake cable(these all look like brand new thats cos they have done less than 1000 miles!!-SOLD
ST/ST shiny brake reservior cover-SOLD
chromed strut tops and bonnet bar-SOLD
MOMO race wheel-SOLD
SHELL & ID-SOLD
badboy bonnet with bonnet pins- £120
FRS front bumper with lower cossie lip and cut out for GRS cooler- £120
FRS rear bumper-£50
RAMAIR cossie maxi flow air filter- £40
H&R coilover suspension Very low miles hardly any use- £600
Brand new unused POWER FLEX front and rear anti rol bar bushes(purple)- £45
FRST full interior MINT no wear on the piping!!- £250
Colection of smiths Guages boost,amps,volts,oil temp,oil pressure and water temp dual gauge will chuck in the shiny mounting plates for 4 of the gauges
- £130
Roll on the next Turbo wagon
2.1 16v turbo Engine,ecu,turbo,hoses,loom- SOLD
Stage 2 CTS box -SOLD
3" bore exhaust -SOLD
GRS intercooler- SOLD
FF lower arms- SOLD
Spec-R header tank- SOLD
AP clutch- SOLD
Kahn RSS 17"alloys with yoko/toyo tyres (E.cond and lots of tread)-SOLD
ESCOS front calipers with Rotor discs(280mm) and pagid fast road pads-SOLD
Nomad A pilar dual gauage holder-SOLD
PACE alloy rad(excellent condition for air cooled turbo's only)-SOLD
RS2000 rear disc conversion with FRST rear beam with power flex bushes and AP discs and pads Recon calipers and modded handbrake cable(these all look like brand new thats cos they have done less than 1000 miles!!-SOLD
ST/ST shiny brake reservior cover-SOLD
chromed strut tops and bonnet bar-SOLD
MOMO race wheel-SOLD
SHELL & ID-SOLD
badboy bonnet with bonnet pins- £120
FRS front bumper with lower cossie lip and cut out for GRS cooler- £120
FRS rear bumper-£50
RAMAIR cossie maxi flow air filter- £40
H&R coilover suspension Very low miles hardly any use- £600
Brand new unused POWER FLEX front and rear anti rol bar bushes(purple)- £45
FRST full interior MINT no wear on the piping!!- £250
Colection of smiths Guages boost,amps,volts,oil temp,oil pressure and water temp dual gauge will chuck in the shiny mounting plates for 4 of the gauges
Last edited by MOONDUST FRST on Sun Nov 28, 2004 5:08 pm, edited 6 times in total.

- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
Re: ***MOONDUST FRST*** breaking!
MOONDUST FRST :
ST/ST shiny brake reservior cover- £10
chromed strut tops and bonnet bar- £15
interested
wot bout delivery?
- wayne!!
- Poster

- Posts: 198
- Joined: Wed Sep 15, 2004 1:55 am
how much u lookin for the shell mate surely worth bit if the shells got no rust??? moondust ones are rare as hell!
[/quote]

- MAD_Adamski
- Elite Post Master

- Posts: 4475
- Joined: Thu Sep 19, 2002 6:28 pm
- Location: birmingham/shropshire Drives:Fiesta RS, Escort cosworth
Is the Escos front brake set up a direct swap with the xr2i ones or will i need any other bits or to modify anything. If so i'll take em.
also, is the RS2k rear brake set up easy enough to fit (ie - me in my garage)
And finally, probabaly most importatant actually, are they effective - ie suitable for track use
I could be interested in both. I'm only in notts too so collection will be easy and you may have a quick sale
chris
also, is the RS2k rear brake set up easy enough to fit (ie - me in my garage)
And finally, probabaly most importatant actually, are they effective - ie suitable for track use
I could be interested in both. I'm only in notts too so collection will be easy and you may have a quick sale
chris

Renault Sport Megane 250 Cup
Ford Fiesta XR2i 2.0 trackcar
- Project_XR2i_Trackcar
- Elite Post Master

- Posts: 2947
- Joined: Thu Apr 22, 2004 10:58 pm
- Location: Melton mowbray
- Your car: Xr2i
I'd like the Nomad A pilar dual gauage holder- £20
Please pm me your address and i'll get the cheque in the post 2 you.
Really sad to see you break the car, always thought this was the best modified moondust FRST around.................after mine of course, lol
Paul
Please pm me your address and i'll get the cheque in the post 2 you.
Really sad to see you break the car, always thought this was the best modified moondust FRST around.................after mine of course, lol
Paul

- PaulFRST
- Elite Post Master

- Posts: 1236
- Joined: Tue Sep 25, 2001 1:00 am
- Location: Bridgend, South Wales
- Your car: Vivaro Van
- jayrs
- Elite Post Master


- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
- fiesta_turbo_daddy
- Senior Poster

- Posts: 360
- Joined: Fri Jul 16, 2004 5:50 pm
- Location: Northamptonshire
PM's sent!
fiest_turbo_daddy- no PM recieved
S1- not sure on size but id say 2 1/4" its a mk3 setup so..., also will rty get pics asap but they are basically just have some road grime on them but are excellent less than 2000 miles
mint FRST- Will let you know dude gonna try sell the complete shell first
rich_frst- Will get some asap mate
Im going working away all week now so its a bit of a pain cos no internet access so feel free to text/call me on 0797051686
I will check the PM's as soon as i get back and more bits will be stripped next weekend
fiest_turbo_daddy- no PM recieved
S1- not sure on size but id say 2 1/4" its a mk3 setup so..., also will rty get pics asap but they are basically just have some road grime on them but are excellent less than 2000 miles
mint FRST- Will let you know dude gonna try sell the complete shell first
rich_frst- Will get some asap mate
Im going working away all week now so its a bit of a pain cos no internet access so feel free to text/call me on 0797051686
I will check the PM's as soon as i get back and more bits will be stripped next weekend

- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
PACE alloy rad(excellent condition for air cooled turbo's only)-£150
RAMAIR cossie maxi flow air filter- £40
interested in both mate, is the rad a direct replacement for the standard frst one? and the same with the filter, obviously it will use diff pipework, but does that come with?
RAMAIR cossie maxi flow air filter- £40
interested in both mate, is the rad a direct replacement for the standard frst one? and the same with the filter, obviously it will use diff pipework, but does that come with?

:2004 Merc Vito: - :1983 Nissan Datsun 280zx: - :1992 GT Pro Series: - :2012 Mondraker Dune R:
- ~nomad~
- Elite Post Master


- Posts: 12504
- Joined: Fri Jan 18, 2002 12:00 am
- Location: hertfordshire
- Your car: Breadvan
Ill let you know on the rad as this may be sold already, the airfilter is still available but i still aint had chance to do pics yet as ive been away in the week and stripping engines at the weekends lol.
PM if you are still interested
PM if you are still interested

- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
- RS rob
- Elite Post Master

- Posts: 4176
- Joined: Tue Feb 18, 2003 1:16 am
- Location: south wales
Re: ***MOONDUST FRST*** breaking!
tailgate , mirrors cash ready!!
- essex boy
- Poster

- Posts: 139
- Joined: Fri Jan 30, 2004 4:52 pm
- Location: romford
- fiesta_turbo_daddy
- Senior Poster

- Posts: 360
- Joined: Fri Jul 16, 2004 5:50 pm
- Location: Northamptonshire
- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
- RS rob
- Elite Post Master

- Posts: 4176
- Joined: Tue Feb 18, 2003 1:16 am
- Location: south wales
- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
Im offline again now till the maybe the weekend or a bit longer
if anyone needs to contact or ask questions etc etc please call/ text my moblie number that ive posted 

- MOONDUST FRST
- Elite Post Master

- Posts: 2366
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Perth/WA (currently)
Do you have any of the following available still?
- Interior front door cards.
- Original Leather Steering Wheel
- Front wheel, Splash Pans
- Fog Lamps
- Original Air Filter Box & Induction Pipes
- Electric Window Motors (o/s & n/s)
- Gear Linkage?
- Jack & Brace?
- Manifold Shield
- Horn
- Washer Jets
- Fuel Pipes
- Brake Pipes
- Thermostat
- Temperature Sensor
Please could you let me know if you have any of the following left, what condition they are in and how much you want for each part & a bulk price? Many thanks!! Please email me if you can: dave@theanstees.co.uk as I dont often check these forums much.
- Interior front door cards.
- Original Leather Steering Wheel
- Front wheel, Splash Pans
- Fog Lamps
- Original Air Filter Box & Induction Pipes
- Electric Window Motors (o/s & n/s)
- Gear Linkage?
- Jack & Brace?
- Manifold Shield
- Horn
- Washer Jets
- Fuel Pipes
- Brake Pipes
- Thermostat
- Temperature Sensor
Please could you let me know if you have any of the following left, what condition they are in and how much you want for each part & a bulk price? Many thanks!! Please email me if you can: dave@theanstees.co.uk as I dont often check these forums much.
- Daveyboy
- Newbie Poster

- Posts: 48
- Joined: Fri Aug 06, 2004 9:05 pm
38 posts • Page 1 of 2 • 1, 2






