Ford Fiesta Mk3.5 Project OEM+: End of an era...
Re: Ford Fiesta Mk3.5' Projekt OEM+: New Temp Alloys
dontpannic :Me? A wheel whore?
I've only had 4 sets
For my Fiesta I've had 4 sets aswell. Guess we're in the same boat.

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: New Temp Alloys
fezza89 :i was gonna buy them wheels when they were for sale on fiesta network a couple of weeks ago
Their for sale again soon if you want first dibs. £200 or so lol

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: New Temp Alloys
Yeah its mine, i know there marmite and understand people might not like them, i thought about doing something different as ive never seen a mk3 on dished 4 spokes, and i couldnt turn down the price at Ford Fair brand new £170 
i love starmags! do it!
i love starmags! do it!

The Fat Fake XR2i
- 3lward
- Senior Poster

- Posts: 219
- Joined: Fri Jun 05, 2009 11:51 pm
- Ratspeed
- Elite Post Master

- Posts: 2787
- Joined: Sat Dec 08, 2007 4:54 pm
- Your car: Mk1 pop plus & Focus ESP
Re: Ford Fiesta Mk3.5' Projekt OEM+: New Temp Alloys
Yes the wheels are from my mates ZS, look so much better on the Mk3. Get so much attention from them being on!
I say no to Starmags, in my opinon, they won't suit the Mk3 and the style I'm going for with the black roof n' shizz.
I say no to Starmags, in my opinon, they won't suit the Mk3 and the style I'm going for with the black roof n' shizz.

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
A few updates and new pictures...
First of all, I had a go at cleaning my dirty header tank. I used:
-White rice
-White spirits
-Bleach
-Washing liquid
-Hot water
Shook it for five mins. Then left it over night, then in the morning I shook it again for five mins, gave the left over bits a clean with a new toothbrush, obviously poured in new fluid aswell, job done. Chuffed with the result!




New photos of how it sits now...





Oil change, rocker cover gasket, oil filter, plugs, leads, basically a mini service on my car. Just need to change all the brakes and fluid...


Home made oil catch tank, with additional sticker.

...and finally, my other home made sticker, got bored haha!

James
First of all, I had a go at cleaning my dirty header tank. I used:
-White rice
-White spirits
-Bleach
-Washing liquid
-Hot water
Shook it for five mins. Then left it over night, then in the morning I shook it again for five mins, gave the left over bits a clean with a new toothbrush, obviously poured in new fluid aswell, job done. Chuffed with the result!




New photos of how it sits now...





Oil change, rocker cover gasket, oil filter, plugs, leads, basically a mini service on my car. Just need to change all the brakes and fluid...


Home made oil catch tank, with additional sticker.

...and finally, my other home made sticker, got bored haha!

James

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Looking good mate
Good work with the header tank too, come up wonders!
Good work with the header tank too, come up wonders!

- Dave G fsi
- Elite Post Master

- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Cheers Dave. Come up very well, chuffed with the result.

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
nice touch with the header tank mate, ive cleaned them in the past but havent got the dregs out in the bottom before.
btw, you know your missing the brass insert from that hose take off dont ya...?
btw, you know your missing the brass insert from that hose take off dont ya...?
- jayrs
- Elite Post Master


- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
thats more than a "mini" service!
worked wonders ont he header tank, if mine werent recently renewed a few years ago id have wanted to do this!
£50 odd quid new now aint they?
thats more than the price of a few chemicals!
love the arse of this, such stance, really complements how wide the fiestas back end is, please dont ruin it
leave it like that!

1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master

- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Jay - Thanks mate, come up wonders, really happy with it. Oh dear, didn't notice this until said, I'll sort it out, cheers fella. 
Jony - Cheers! Only the heat sheid hits the floor ahaha! It's awesome! Get loads of attention. I'm thinking of keeping these wheels now, and get them refurbed. These are the closest I'll get to BBS and that's all I've wanted. I have to make it higher during the week because of about five speedbumps on the way to go. But on weekends it's as low as your Grandma's blood cell count!
Oh yeah and I've tinted some headlights. Let's see if I can pull it off?!
Leave the cage or get rid???
James
Jony - Cheers! Only the heat sheid hits the floor ahaha! It's awesome! Get loads of attention. I'm thinking of keeping these wheels now, and get them refurbed. These are the closest I'll get to BBS and that's all I've wanted. I have to make it higher during the week because of about five speedbumps on the way to go. But on weekends it's as low as your Grandma's blood cell count!
Oh yeah and I've tinted some headlights. Let's see if I can pull it off?!
Leave the cage or get rid???
James

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
- trecoll
- Elite Post Master

- Posts: 1324
- Joined: Mon Dec 17, 2007 5:33 pm
- Location: Addlestone, Surrey
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Yeah, need the tracking done.
I can't think of any alloys that would suit this to be honest, hense why I'm keeping them lol
I can't think of any alloys that would suit this to be honest, hense why I'm keeping them lol

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
You need something wish some dish. Those are too flat faced.
http://cgi.ebay.de/RSL-Alufelgen-Dunlop ... 4157871c31
http://cgi.ebay.de/RSL-Alufelgen-Dunlop ... 4157871c31

- MK2 Jamie
- Elite Post Master

- Posts: 1549
- Joined: Wed Mar 05, 2008 2:20 pm
- Location: Suffolk
- Your car: 1988 Ford Fiesta Ghia
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
I agree Jamie. But, choosing wheels hurts my head. Hense why I'm sticking with these. I can't decide. 

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Looks good James, however I'd be inclined to lose the reverse rake, lower the front more or raise the back to bring it level 
- dontpannic
- Elite Post Master


- Posts: 7246
- Joined: Thu Mar 16, 2006 5:21 pm
- Location: Orpington, Kent
- Your car: Fiesta ST / Saxo VTS track car
Car: 2007 Ford Fiesta ST
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Jesus that is proper slammed on the rear lol!
- - Danny Boy -
- Elite Post Master

- Posts: 3844
- Joined: Mon Sep 10, 2007 5:49 pm
- Location: Portsmouth
- Your car: Fiesta Si 2.0
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Nick - Thanks mate, don't worry, it will be sorted. Just wanted to test over the weekend how it would run on the lowest setting. It was immense!
Danny - It was sooo much lower on the 13's, dangerously low! Ahaha
Again guys... Wheel choice is an issue. We've already mentioned Starmags, but in my opinon, they'll only suit a Mk1 or 2 Fezta. Hmmmmm
Danny - It was sooo much lower on the 13's, dangerously low! Ahaha
Again guys... Wheel choice is an issue. We've already mentioned Starmags, but in my opinon, they'll only suit a Mk1 or 2 Fezta. Hmmmmm

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Looking good! i reckon the wheels you have will look good silver instead of black.
or starmags
or starmags

- Ratspeed
- Elite Post Master

- Posts: 2787
- Joined: Sat Dec 08, 2007 4:54 pm
- Your car: Mk1 pop plus & Focus ESP
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
MK2 Jamie :You need something wish some dish. Those are too flat faced.
http://cgi.ebay.de/RSL-Alufelgen-Dunlop ... 4157871c31
oh god dont start him off again lol

1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master

- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
LOLOLOL

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Right,
Your final thoughts on these???:
Image, 13x7 front, and 13x7.5 on the rears.

What d'you think?
James
Your final thoughts on these???:
Image, 13x7 front, and 13x7.5 on the rears.

What d'you think?
James

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
yup you've done it now jamie, hes off again 

1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master

- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
never thought about pepperpots ?
a nice refurb ccould get them looking minty fresh, and they might look good?
and they've got dishhh
a nice refurb ccould get them looking minty fresh, and they might look good?
and they've got dishhh
- Michael!
- Elite Post Master

- Posts: 2088
- Joined: Tue Jul 27, 2010 2:15 pm
- Location: Blackpool
- Your car: RS1800 Sleeper Project + 6N2
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
I just don't know what to have that's all?! Why is it so hard for me? llama
Hmmm Pepperpots are nice, but I want something different. Something shiney! Pfttt so confused. Starmags are my only option, but they totally won't suit a Mk3 in my opinon.

LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master

- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
- bakewell001
- Elite Post Master

- Posts: 2442
- Joined: Thu Feb 10, 2005 8:54 pm
- Location: Margate, Kent
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
EUFez :Hmmm Pepperpots are nice, but I want something different. Something shiney! Pfttt so confused. Starmags are my only option, but they totally won't suit a Mk3 in my opinon.

them four spokes will not suit a mk3 at all. Starmags will.

- Ratspeed
- Elite Post Master

- Posts: 2787
- Joined: Sat Dec 08, 2007 4:54 pm
- Your car: Mk1 pop plus & Focus ESP
- Curtis
- Poster

- Posts: 65
- Joined: Thu Feb 24, 2011 1:06 pm
- Your car: Seat Arosa 16v Sport
- MK2 Jamie
- Elite Post Master

- Posts: 1549
- Joined: Wed Mar 05, 2008 2:20 pm
- Location: Suffolk
- Your car: 1988 Ford Fiesta Ghia
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
Looks alright, but if you read i was refering to the four spokes that james posted up, not the RS four spokes

- Ratspeed
- Elite Post Master

- Posts: 2787
- Joined: Sat Dec 08, 2007 4:54 pm
- Your car: Mk1 pop plus & Focus ESP
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
My idea wins
Settle for pepperpots
Settle for pepperpots
- Michael!
- Elite Post Master

- Posts: 2088
- Joined: Tue Jul 27, 2010 2:15 pm
- Location: Blackpool
- Your car: RS1800 Sleeper Project + 6N2
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
MikeHop :My idea wins
Settle for pepperpots
polished pepperpots

- Ratspeed
- Elite Post Master

- Posts: 2787
- Joined: Sat Dec 08, 2007 4:54 pm
- Your car: Mk1 pop plus & Focus ESP
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
What a photo, I remember that day
- Smo
- Elite Post Master


- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
The polished Pepperpots could work, but I really like the wheels you have already 
- Smo
- Elite Post Master


- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: Ford Fiesta Mk3.5' Projekt OEM+: Few Things...
What about polished A3 pepperpots
?
plus, they are different james, you dont see many mk3s cruising around with them and they look imense with stretchhhhhhhhhhhh!
plus, they are different james, you dont see many mk3s cruising around with them and they look imense with stretchhhhhhhhhhhh!
- Michael!
- Elite Post Master

- Posts: 2088
- Joined: Tue Jul 27, 2010 2:15 pm
- Location: Blackpool
- Your car: RS1800 Sleeper Project + 6N2







