fiestaturbo.com

[jimmyesh]

I love the way this car keeps evolving, even more impressed that you've been using it as a daily-driver!

[crazycage]

I love the way this car keeps evolving, even more impressed that you've been using it as a daily-driver!

using it as a daily driver has helped it evolve

[crazycage]

got this for my boost controller so i can launch hard off the line in first and maybe second gear then hit it for high boost
got to be worth a go

[jonyb4]

lol nice mate, tried it out yet?

[crazycage]

lol nice mate, tried it out yet?

only on the road! but it seems good wont know till i hit the strip tho

[creator]

how did you get on on sunday gary? only time i saw you was at the end of the day and you were passed out in your passenger seat so i left you to it

[crazycage]

how did you get on on sunday gary? only time i saw you was at the end of the day and you were passed out in your passenger seat so i left you to it

pretty s**t mate, only did two runs on the 0-60 i was ill as fook thats why you saw me passed out i couldnt stand up! had to get a mate to drive the car home
the tyres were too big really and bogging down big time in 2nd gear costing me loads of time ,but thats why i took them just a test before i run them at the pod
rick (my mapper mate) says the launch/flat shift with some timing pulled to spool the turbo on gear changes will stop the bogging plus i will be running more power and the gas next time out at the pod.
i ran the same time as some other lad and he is being a twit over it

[creator]

how did you get on on sunday gary? only time i saw you was at the end of the day and you were passed out in your passenger seat so i left you to it

pretty s**t mate, only did two runs on the 0-60 i was ill as fook thats why you saw me passed out i couldnt stand up! had to get a mate to drive the car home
the tyres were too big really and bogging down big time in 2nd gear costing me loads of time ,but thats why i took them just a test before i run them at the pod
rick (my mapper mate) says the launch/flat shift with some timing pulled to spool the turbo on gear changes will stop the bogging plus i will be running more power and the gas next time out at the pod.
i ran the same time as some other lad and he is being a twit over it

oh right shame you was ill mate,yeah i saw your mate driving home i was parked up just infront of you.and those tyres looked huge. yeah well at least you have got to see how they handle on the tarmac now and if you can map through it to stop it bogging it will be awsome.more power? lol your car just keeps getting better and better mate,iv just been reading the thread on pf about it mae me laugh they were making such a big deal about it he still got a prize didnt he lol
whens the next time youl be out at pod mate? also hows ricks escort coming along? did he run?

[crazycage]

had a new dash done for the fezz with a 3 gauge pod built onto the top of it for my stack afr,fuel pressure and egt when i get them. there just random old not wired in gauges in the holes for now.










i now have the gearbox built up with the ratios i want and i will be fitting it next weekend
i am also having the coilovers rebuilt, the rears are now leaking and fronts have seen better days

[jayrs]

i like that dash

[creator]

nice one gary that dash looks the nuts and glad you finally have the new gear box.hopefully will be seeing you at pod in october if i can make it

[crazycage]

just got home and my new spring is here for my little forge actuator so im off out to fit it and see if i can run more than 1.5bar peak boost (held 1.33) . would like to see around 1.7 held will report back later

[creator]

Nice one Gary hope it's all good news

[luca]

REPORT PLEASE!

Have we seen 2.5bar yet

[creator]

Looks like he's had a late night Luke so could suggest he has been out mapping late and it's all gone smooth or something not right and he's in the garage taking something to bits swearing alot

[crazycage]

REPORT PLEASE!

Have we seen 2.5bar yet

no mate ,i put to much pre load on it last night .
with the boost controller off it when from 0.8bar to 1.98bar and popped a boost hose off lol .but by then it was too hot and starting to get dark
ive just put the hose back on now so im not driving to work with no boost will sort it out tonight tho. want about 1.1bar off so i can have that as my low boost to aid off the line traction

[crazycage]

Looks like he's had a late night Luke so could suggest he has been out mapping late and it's all gone smooth or something not right and he's in the garage taking something to bits swearing alot

i would love to get in my garage mate but ricks cars in there in bits lol. his too new manifolds the mint tho.

[creator]

Looks like he's had a late night Luke so could suggest he has been out mapping late and it's all gone smooth or something not right and he's in the garage taking something to bits swearing alot

i would love to get in my garage mate but ricks cars in there in bits lol. his too new manifolds the mint tho.

fairynuff mate you doing more mapping tonight then? and wich manifolds you done for ricks? over gearbox type? pics

[jimmyesh]

Loving the new dash mate I wish I'd done something like that with mine now instead of going the conventional A-Pillar route

Stack gauges are the nuts BTW, I've just bought one of their wideband kits and a water temp gauge - they cost a few quid but they're the dog's b*llocks

[crazycage]

Looks like he's had a late night Luke so could suggest he has been out mapping late and it's all gone smooth or something not right and he's in the garage taking something to bits swearing alot

i would love to get in my garage mate but ricks cars in there in bits lol. his too new manifolds the mint tho.

fairynuff mate you doing more mapping tonight then? and wich manifolds you done for ricks? over gearbox type? pics

having a night off mate will set the pre load how i want it tomorrow and map it very very late one night this week.
the manifold is over box but its the inlet that i like most ! built from scratch and it has throttle bodies and 8 injectors
ill post some pic's soon

[crazycage]

Loving the new dash mate I wish I'd done something like that with mine now instead of going the conventional A-Pillar route

Stack gauges are the nuts BTW, I've just bought one of their wideband kits and a water temp gauge - they cost a few quid but they're the dog's b*llocks

i cant take the credit for it mate a friend of mine raj from autoflock motorsport done it .

[creator]

having a night off mate will set the pre load how i want it tomorrow and map it very very late one night this week.
the manifold is over box but its the inlet that i like most ! built from scratch and it has throttle bodies and 8 injectors
ill post some pic's soon[/quote]

sounds awsome mate how long it take you to build the new inlet? I just love how far you've come in the last year and a half.will ricks be all built up and mapped for when your going to pod in October? Would be good to have a look at your new manifolds in the flesh mate

[crazycage]

having a night off mate will set the pre load how i want it tomorrow and map it very very late one night this week.
the manifold is over box but its the inlet that i like most ! built from scratch and it has throttle bodies and 8 injectors
ill post some pic's soon

sounds awsome mate how long it take you to build the new inlet? I just love how far you've come in the last year and a half.will ricks be all built up and mapped for when your going to pod in October? Would be good to have a look at your new manifolds in the flesh mate [/quote]

not a chance in hell of his escort being finished lol.he will be there tho in his audi s4 trying to beat me it has a tunned rs4 engine putting out 410hp ,richie will also be there in his 300hp 1600cvh that has loads of parts i have made on it

more hours than i'd like to count gone into this inlet its been a right pain in the arse .will be building one the same but without the throttle bodies for mine over the winter.

[creator]

sounds awsome mate how long it take you to build the new inlet? I just love how far you've come in the last year and a half.will ricks be all built up and mapped for when your going to pod in October? Would be good to have a look at your new manifolds in the flesh mate [/quote]

not a chance in hell of his escort being finished lol.he will be there tho in his audi s4 trying to beat me it has a tunned rs4 engine putting out 410hp ,richie will also be there in his 300hp 1600cvh that has loads of parts i have made on it

more hours than i'd like to count gone into this inlet its been a right pain in the arse .will be building one the same but without the throttle bodies for mine over the winter.[/quote]

thatl be good to watch big old rs4 power againts the fez, is richies the black escort? if so i got a few vids of both of you from central day i think but not been able to upload them on youtube,he always seems to have the edge on you off the line mate but that was when you had a fooked gearbox so ill let you off lol.
can i ask why you wont be using the throttle bodies for your engine? and ill wait till after winter before i buy a inlet for my zetec then mate

[luca]

You should hammer that Audi mate!

[crazycage]

sounds awsome mate how long it take you to build the new inlet? I just love how far you've come in the last year and a half.will ricks be all built up and mapped for when your going to pod in October? Would be good to have a look at your new manifolds in the flesh mate

not a chance in hell of his escort being finished lol.he will be there tho in his audi s4 trying to beat me it has a tunned rs4 engine putting out 410hp ,richie will also be there in his 300hp 1600cvh that has loads of parts i have made on it

more hours than i'd like to count gone into this inlet its been a right pain in the arse .will be building one the same but without the throttle bodies for mine over the winter.[/quote]

thatl be good to watch big old rs4 power againts the fez, is richies the black escort? if so i got a few vids of both of you from central day i think but not been able to upload them on youtube,he always seems to have the edge on you off the line mate but that was when you had a fooked gearbox so ill let you off lol.
can i ask why you wont be using the throttle bodies for your engine? and ill wait till after winter before i buy a inlet for my zetec then mate [/quote]
yes its the black escort he doesnt have me off the line tho i always let him go then i go ,his 60ft are about 2.5sec's mine are 2.1's.
i dont to to complicate thing with the throttle bodies thats all plus the cost and for a little gain isnt worth it for me

[creator]

yes its the black escort he doesnt have me off the line tho i always let him go then i go ,his 60ft are about 2.5sec's mine are 2.1's.
i dont to to complicate thing with the throttle bodies thats all plus the cost and for a little gain isnt worth it for me[/quote]

oh right i always thought he had you on the start obviously not then lol,
what are you making the inlets out of this time mate? same as your other inlets you made? ill wait to see what you build for yours then as im still indecided on inlets .i take it it would cost a fair bit more for the throttle bodies

[crazycage]

yes its the black escort he doesnt have me off the line tho i always let him go then i go ,his 60ft are about 2.5sec's mine are 2.1's.
i dont to to complicate thing with the throttle bodies thats all plus the cost and for a little gain isnt worth it for me

oh right i always thought he had you on the start obviously not then lol,
what are you making the inlets out of this time mate? same as your other inlets you made? ill wait to see what you build for yours then as im still indecided on inlets .i take it it would cost a fair bit more for the throttle bodies[/quote]


i have had a batch of head plates laser cut so there a direct bold on plenum, the runners are made from ally tube, the plenum is 3mm rolled sheet and i have injector bossed being machined this week. there a twin plenum design and will be around 500 quid. and rick's is different but still a twin job.ill post a pic of his some time next week if all the parts turn up on time

[crazycage]

heres a taster of ricks and no skitting at the blue peter parts lol

[jimmyesh]

Nice fabrication mate The stars are wholegrain too so good for your digestive tract!

[luca]

heres a taster of ricks and no skitting at the blue peter parts lol

TOOOO INFINITY and BEYOOOOOOND!!!!!!!!

[corrupt_panda]

Awsome motor, inlet looks the business

[creator]

inlet looks sweet mate,also good price for the time and effort you put into making them mate.im sure ill read on here once you have done yours but keep me posted mate

[crazycage]

heres a taster of ricks and no skitting at the blue peter parts lol

TOOOO INFINITY and BEYOOOOOOND!!!!!!!!

c**t

[crazycage]

few more for those who are interested ,just waiting on my injector bosses to come back from the machine shop and my new rollers so i can fab the cone