fiestaturbo.com

[rsturbonutter]

Tomorrow old chap I will get you one

[AW3K]

well i bet most of you thought this was dead . it certenly isnt

birth of my son etc

made a little progress but as most parts had been stored in a leaky garage it got damaged, mainly the gaskets

first up my local motor factor is a star they let me draw round a gasket from a new pump. no where but ford sold the gaskets separate, not paying £12 ish for a bit of paper.



pump fitted



new inlet gaskets



new looking maf and throttle body and box of hoses and bits




finally some more of the wiring re-taped





ordered all stainless steal fixings which should be here tomorrow, also changing the colour of the cam cover and sump.


Andy

[AW3K]

bit more progress

some bits painted in high temp paint







egr blanked off and manifold fitted with new studs and nuts





finally i had some new stainless braided ptfe fuel injector lines made up about £7 each from my local hydrolics place





Andy

[Smo]

Liking the fuel line, Andy!

I assume it's all rated for high pressure unleaded/biofuel?

[AW3K]

Liking the fuel line, Andy!

I assume it's all rated for high pressure unleaded/biofuel?

its same ptfe inner pipe stainless overbread fuel/oil/deisle rated made professional by mend a hose
http://www.mendahose.co.uk/

pushed on and crimped.

Andy

[AW3K]

both hoses test fitted and clamped down to the original bracket

you may have noticed the rocker cover has changed colour lol

also the rail and hose ends are getting polished






Andy

[AW3K]

Non Pas altonator mount arrived cleaned and painted









need a new alt now

Repainted the sump a nice satin black tidied it up no end



alt mount fitted , i used old head bolts to fix it, as i didnt have the bolts and i think it looks better.



timing tensioners fitted not looking forward to fittin the belt.



Fitted stainless bolts with antisieze compount






painted the rocker cover again and dug out the cross over







comments etc welcome

Andy

[AW3K]

Fitted tining belt and sorted the timing. Never want to do that again.







comments etc welcome

Andy

[jayrs]

Lol mate reminds me when I fine mine seeing all the stuff piled on there lol

Timming up a Zetec is a bit if a paint ain't it

[AW3K]

Lol mate reminds me when I fine mine seeing all the stuff piled on there lol

Timming up a Zetec is a bit if a paint ain't it

I forgot how much of a pain it was. It's done now thank god.

This is the wife's car. Mine has stuff piled on it aswell.

[jayrs]

Lol dude you wanna see my xr2! Lol

[Smo]

Does the alternator not use the bracket as its earth route? Or have you still got unpainted areas of the bracket where it mounts to the block and alternator? Just looked like you'd painted the entire thing from the photos!

[AW3K]

Hi Simon. Long time no speak. Yeah the back is unpainted so are the mounting points on the block.

I do need to remove some paint from where the alt bolts to the mount.

Andy

[AW3K]

few more bits painted and fitted

chemical welded the mounts on the cam cover and stainless fixings again














comments etc welcome

Andy

[niracka]

Looking good Andy now get it finished!!!

Long time no speak mate hows things? Thinking of getting a fezzer to play with in my spare time.

olly