fiestaturbo.com

[heeman10]

Greetings!

A number of you will have seen that Steve (Scort) and I have been setting up a business together (in my Off Topic thread, started back in August). Well we're about ready to open our doors at long last!

Welcome, everybody, to the wonderful world of For-Tune PVE! We are operating out of Ilton in Somerset (Multimap linkshows us here over on the left; post code TA19 9DU) and offer a wide range of services:

~ 1,200bhp Dyno Dynamics rolling road - allows us to offer power runs, rolling road shootout days, diagnostic and set-up work and chip tuning/OBD II services. Engine management supply, installation and mapping will also be on offer in the not-so-distant future.

~ Mechanical work - No job too small! Servicing, pre-MOT checks, brake conversions, engine conversions. You name it, we can probably do it!

~ Fabrication - There is a fabrication company just seven doors down from us on the business park, meaning we can offer all manner of custom made intercoolers, radiators, manifolds (an example of which can be seen below, on my car) and other parts, leaving very little that we can't offer right out of our doorway.

Open Days

Since we are just on the brink of opening, we are aiming to hold a couple of opening events. Power runs will be offered at the discounted price of £35 this Saturday (29th Sept), £45 all of next week, and back up to the usual price of £50 from Monday (8th October) onwards. Please get in touch if you would like to come this Saturday, as numbers will be limited. A power run consists of three power runs, a consultation relating to your data afterwards, and a printout of your run.

Rolling road days

We are available for club/region rolling road days, if a group of five or more of you want to come for a day of discounted power runs. Please get in touch for details and pricing.

Website

Our website is under construction at the moment, but should be up and running within two weeks with full pricing and information. For now, please contact us on: 01460 57999 or fax us on 05601 264062.

Some shots of the workshop:

Development cars:



Toyota Supra 3.0 twin turbo:



Honda CRF450 competition motocrosser in our motorcycle clamp:



Tubular exhaust manifold (available on request). Direct fit for Zetec head and T3 turbo to replace ERST manifold:



Steve on the right, me on the left. Come on in!

[Capri]

AWESOME!

Top work chaps!

Best of luck!

[Captain Tightpants]

Cheers Mr Capri.

I've just realised how frighteningly good looking I am!

Steve

[Tweek]

So gutted I'm going to be working this Saturday! If there's an FT RR day I'll definitely come to that though. Best of luck to you guys!

[Oranoco]

You have been busy

Absolute best of luck for this venture. Will make sure we drop in when we are down that way on holiday, will even bring some Jaffa Cakes along for you

[heeman10]

So gutted I'm going to be working this Saturday! If there's an FT RR day I'll definitely come to that though. Best of luck to you guys!

There undoubtedly will be - pick an organiser and we can sort a date out! Thanks matey!

[D.J]

Good luck guys!!!! Hope it is a big success for you. I am sure it will be, after all, you've got most of FT.com supporting you!!!!

[Chris 2i]

nice one guys, wish you all the best with this!

[Max M4X WW]

Good stuff, Love the last pic I may well pop down this weekend guys. If its not raining ill bring the fiesta. If it is probably the 306. Both for a power run. May have to bring the 306 though as im quite skint!

[Brammer]

Great work lads, seems you been working hard in your absence's

Like i said in the other post, its slightly too far for me to come for a set-up etc as you'll appreciate jim

Great work

[black2]

Yay thats looks really good.

This saturday hmmm, wil have to see if i can make it. Trouble is im in the middle of doing some alterations to my house at the mo so its difficult to take time away from that.

We'll see.

Well done chaps (That photo of you two, for some reason reminds me of the mitchell brother from Eastenders lol)

Gareth.

[Turboboy67]

Good Luck guys and I will be there on Saturday to have a nose around

Can I have a tee-shirt please ????

I will come along first thing because I want to go to Mini day @ Castle Combe,

what time are you open on Saturday morning ??

Cheers

[~nomad~]

Wicked stuff mate. I will be coming along to see you guys asap, just as soon as I get a free day
Good luck on sat and hereonafter

[The Stig]

brill!

[Sphinx]

Eeeeeeeexcellent

[heeman10]

Thanks everybody, it means a lot to have all your support

Max - We're already ordering in some extra straps to keep Capris Capri on the rollers, hopefully they'll be here in time to harness the 306

Chris - Agreed! A 350 mile trip for a discounted power run is a tough call to make though...

Gareth - There's always next weekend if you can't make it this weekend Hope the house is going well - and I don't remember the Mitchell brothers coming from a modelling background like ourselves

Shaun - Would be good to see you again matey! I missed you at Alton Towers! We'll be open at 8:30am on Saturday Mini day should be a laugh! You want a staff T-shirt eh? You must first prove yourself!

nonads - Free day will be the day you stop removing boost hoses with an angle grinder!

[Max M4X WW]

I have no idea what its running atm, would like to have it done after the tune but if everyone is about this weekend i may as well see what its like now! Cant justify bringing the fiesta, will prob be raining and i want to have that done again at the place it was last time even though they have a DD RR as well.

I may have a couple of cars to clean tho and do need the cash. Will know nearer end of week!

[onslack]

congrats to you both

might be dropping a pm about a few bits when i have some cash

[BALBOA RS]

5 day forecast says saturday will have sunny spells but poor visibilty

I'll be there though as long as it's not raining

Will be great to see it all up & running.

Top marks to you both for getting this all ready in such a short time aswell!

Congrats.

Ross.

[Mikee_RS]

[FRSJON]

nice one mate ...all the best... if you get shaun a t-shirt he ask me to say could he have a red one??

[jek fabs]

MORNING!!!!!!!!!!!!! Thought I better get on this forum as the rest of you are! Pics look cool on the web better than they did on the phone!

[heeman10]

onslack - sounds interesting

Ross - You're as bad as Mike Wall! He won't go anywhere unless it's 30C and 0% humidity!!

Mikee - Cheers, see you down here when that 'box is in!

JON - We couldn't haved hoped to find two more perfectly-suited models for our fashion range! You lesbians!

James - Morninnnng! Yeah, we're munters in the flesh but rather dashing on tinterweb! You should get yourself online more often!

[JamieFRST]

Looking good you two - and so is the workshop So do I get a free power run as my car is in the publicity shot

Is that the crazy bints Saph Cossie you are leaning on? Has James boned her yet

[Ollybee]

Top work Heeman & Scort! Very best of luck with this, you'll have branches all over the country soon?!

[Captain Tightpants]

Thanks for your support everyone!

JEK, Glad to see you have moved over here you raving homo!

Jamie, It is indeed that crazy girls Saph. James is trying I think. His discount structure revolves heavily around sexual favours you see. Good to know for future reference!

Steve

[~nomad~]

His discount structure revolves heavily around sexual favours you see. Good to know for future reference!

Steve

good to know

[heeman10]

Where are the good looking girls when you need them?

[mrorange2]

Looks great good luck to both of you and hope everythign goes well.

If we are ever down that way we will deffo pop in and see how things are going!

[dawsfezzie]

top stuff!!im not 2 far away anymore!! might throw sum work you way!! how much is that manifold???? im going ZT soon so might need help off you guys in the future!!!!

[heeman10]

Tim - Cheers dude, glad to see your engine's being put to use, probably through us as well

daws - Long time no hear! The manifold is around the £400 mark, and can be made any which way you like really. Hear from you in a bit then

[dawsfezzie]

i know mate, ive benn busy moving down myself, seems an ok price, still looking at what type of turbo, injectors etc i want yet but i'll get on the blower when the times right!! but zt is the future!!

[properphatboy]

Nice one guys! Sure all our fiestas will be safe in your knowledgeable hands. You'll defo be the first people I think of if/when I move down South Wales. Sure there'd be plenty of interest if you could get some proper stainless Fiesta Zetec exhaust manifolds made up.

Ps: Want to give me a job? Have a degree in Automotive Electronics and nobody else seems to want me.

[jayrs]

nice one mate ...all the best... if you get shaun a t-shirt he ask me to say could he have a red one??

[Ollie]

Looking great guys!!

I'd bring a car down but the XR's garage bound I'm not sure the Mk6 has actually got enough power to turn the rollers.