Zetec Exhaust manifold
14 posts • Page 1 of 1
Zetec Exhaust manifold
The chromed pipes that come out of the exhaust manifold have snapped on the T section. Can these be replaced or do i need another manifold?
Any help would be great
!
Any help would be great
!

- jeek
- Senior Poster
- Posts: 350
- Joined: Sun Dec 01, 2002 9:41 am
- Location: Dunfermline
sounds like the pulse air system to me. not too sure if it'll run without it.
JJ
JJ
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec

Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!

Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!
- jdfiesta
- Elite Post Master
- Posts: 3731
- Joined: Thu May 15, 2003 2:34 pm
- Location: Doncaster
- Your car: V70 T5
Are you talking about the pulse-air system that has the 4 pipes that go into the manifold? If you can get to take them off, you can get blanking plugs like I have done. I cant remember the Finis code for them but i'll try and find it for you.
- krsi
- Elite Post Master
- Posts: 1541
- Joined: Tue Feb 03, 2004 5:10 pm
- Location: Dagenham Drives: S14 Zenki 200SX
Got these off an old thread so i hope there correct
Blanking plugs - FINIS 6732263
Copper Washers - FINIS 1008597
Hope this helps
Blanking plugs - FINIS 6732263
Copper Washers - FINIS 1008597
Hope this helps
Last edited by krsi on Tue Nov 09, 2004 3:35 pm, edited 1 time in total.
- krsi
- Elite Post Master
- Posts: 1541
- Joined: Tue Feb 03, 2004 5:10 pm
- Location: Dagenham Drives: S14 Zenki 200SX
Also RogerP@Edwardsford.co.uk He should be able to get them for you, Get him to check them first, but he's usually helps me out a lot, he's a good bloke and cheaper than most.
- krsi
- Elite Post Master
- Posts: 1541
- Joined: Tue Feb 03, 2004 5:10 pm
- Location: Dagenham Drives: S14 Zenki 200SX
Also RogerP@Edwardsford.co.uk He should be able to get them for you, Get him to check them first, but he's usually helps me out a lot, he's a good bloke and cheaper than most.
- krsi
- Elite Post Master
- Posts: 1541
- Joined: Tue Feb 03, 2004 5:10 pm
- Location: Dagenham Drives: S14 Zenki 200SX
Give that roger an email at RogerP@Edwardsford.co.uk , he's from fords, say you got he's address of me and give him the finis codes.
- krsi
- Elite Post Master
- Posts: 1541
- Joined: Tue Feb 03, 2004 5:10 pm
- Location: Dagenham Drives: S14 Zenki 200SX
krsi :It can run as just as well without it, as its job it only to inject air into the exhaust system to get the cat up to operating temperatures quicker.
this is wrong mate.
the motor pulls air from the exhaust manifold throught the filter then puts it into the inlet on cold start up.
this was for emmission purposes but its not needed for the mot.
- 16vzetec.com
- Newbie Poster
- Posts: 6
- Joined: Fri Mar 11, 2005 9:30 pm
Re: Zetec Exhaust manifold
currently looking at doing this myself , what would happen if i fitted a aftermarket manifold , do i do away with the pulsair system ?

- jordan2litre
- Senior Poster
- Posts: 240
- Joined: Sun Oct 18, 2009 3:01 pm
- Your car: Fiesta mk3 SI 2.0L
Car: 1995 Ford 2.0 zetec
Re: Zetec Exhaust manifold
I have a non egr manifold for sale if anyone is interested not just a bunged off one. £15 posted

accralite pistons,steel rods,stg3 head,stg3 T3,kent cam,cts gearbox,Gotech MFI PRO X,VXR Injectors.
- matty872
- Post Master
- Posts: 550
- Joined: Mon Jun 12, 2006 8:53 pm
- Location: Herts.
- Your car: E46 M3 + st170'd Escort GTI
Re: Zetec Exhaust manifold
jordan2litre :currently looking at doing this myself , what would happen if i fitted a aftermarket manifold , do i do away with the pulsair system ?
Yep.
- - Danny Boy -
- Elite Post Master
- Posts: 3844
- Joined: Mon Sep 10, 2007 5:49 pm
- Location: Portsmouth
- Your car: Fiesta Si 2.0
14 posts • Page 1 of 1
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
Only five months late! After missing 2023 I made it to Ford Fair 2024, but various reasons mean it's taken …
Saturday, 4th January 2025 17:23
What's everyone driving these days? Anyone still have their Fiesta from back in the day? Maybe you've moved on to …
Thursday, 4th January 2024 07:23
Another blast from the past! Jason Ripp's RS Turbo from 2001. I wonder what happened to this car? A reg …
Tuesday, 2nd January 2024 16:52
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.