fiestaturbo.com

[robotrhys]

Please delete this thread

[turbom]

Out of intrest how much for the cossie fuel pump?????

[Fraggle]

Id like to show an intrest in the rear lights please..just doing some maths

[martyn laing]

What is the suspension bud 30/40mm lowering, also how much posted to Sunderland cheers.

[robotrhys]

turbom - I have updated the description, the fuel pump is actually an uprated Bosch Escort RS Turbo fuel pump.

martyn laing - The dampers are the same as those listed below, the claimed drop is 60mm although i assume this is compared with non RS Turbo Mk3 fiesta so probably around 40mm:
http://www.ruderacing.co.uk/Suspension_/_Chassis-Spring_&_Damper_Kits-G-Max_Spring_&_Damper_Kits-Ford-Ford_Fiesta_III_all_models_excluding_ABS/Van/Diesel_(1.94-9.95)/c711_4123_121409_121454_121462/p100055952/G-Max_Supersport_Suspension_Kit_-_Ford_Fiesta_III_all_models_excluding_ABS/Van/Diesel_(1.94-9.95)_(40_FO_11L)/product_info.html

Just a little update, the RS Accessory rear lights have been sold, more good stuff has been added to the main post. All PM's replied to.

Thanks for all the interest so far,
Rhys

[fiestaturbomk3]

hello mate wondering if you have shipped the lowering springs and shocks yet please ???

[robotrhys]

Hi Adam,
Yes, these were sent a couple of days ago via 48hr courier service so should be with you very soon

Thanks,
Rhys

[fiestaturbomk3]

Hello mate yeh I got them sorry asked the misses if anything had arrived and she said no lol she said she forgot anyways all here and more than happy thanks

[robotrhys]

Great news, I'm glad they have arrived safely and you're very pleased with them.

All the best,
Rhys

[fiestaturbomk3]

Don't surpose you have an rst bonnet do you and tail gate?

[robotrhys]

I don't I'm afraid, from the top of my head some other parts available which I have yet to list are mk3 front passenger window, sunroof, mk2 fiesta rear window, escort cosworth alloys, mondeo st24 alloys, fiesta rs1800 mint complete rear bench and door cards, led 3rd brake light and wiring, various engine parts such as RS Turbo alternator and belt, 2 x ignition coils, new oil filter and sump plug, rear mk3 fiesta strut top mounts, a few coolant hoses, wiper blades, sparco carbon pedals, genuine ford floor mats, microfibre wash mits, car dehumidifiers. Official photos and write up for all of these will be added once a few more of the current items have sold from here and a few other threads I have on other forums (also selling skoda parts and alfa parts).

Cheers,
Rhys

[mikeymikeyp]

I know how heavy the drilled disks are mate how much posted to central scotland But i need to know what size they are ,,my pal runs 7x13 capri rims on his mk3 fez and he might be intrested but need the diameter of the disks Please

[robotrhys]

Hi mate, delivery will be £7.49 via tracked courier service. The pepperpot style high performance discs were originally bought for my capri as I loved the look of them but they will require modifying slighty to suit 108mm PCD, they're currently 4 x 92.5mm fitment with a center bore of 69mm and diameter of 244mm. Here is a photo of the disc and caliper inside a 13 inch pepperpot which is essentially the same wheel and there is plenty of space. Coupled with the calipers and the lightweight chassis of the Fiesta, this will make for a formidable brake setup.



Hope this helps!
Rhys

[mikeymikeyp]

Sorry bud i thought they were bigger ,thanks for going to the trouble taking the pics but just not what hes needing cheeRS

[robotrhys]

244mm is about as big as you can go on a 13" wheel whilst leaving enough space for the caliper!

[fiestaturbomk3]

How much you looking for the escort cosworth wheels

[robotrhys]

Looking for £475 for the Escort Cosworth wheels. They're in excellent condition, professionally finished in fresh moondust silver metallic paint with clearcoat. Two rear tyres are like new, two fronts will need to be renewed. Photos have been added to the main post.

Thanks,
Rhys

[boeb]

244mm is about as big as you can go on a 13" wheel whilst leaving enough space for the caliper!

Am running mk5 rs2000 set up already mate on fez wich is bigger than 244mm

S2 exhaust wots the bore width of centre section ...no got a key handy to measure lol

[robotrhys]

244mm is about as big as you can go on a 13" wheel whilst leaving enough space for the caliper!

Am running mk5 rs2000 set up already mate on fez wich is bigger than 244mm

S2 exhaust wots the bore width of centre section ...no got a key handy to measure lol

I did say 'about' lol You might get a few extra mm's but with this caliper and the design on the pepperpot alloy I wouldn't want to run much bigger tbh.

The key had to suffice whilst I was taking photos as I didn't have anything to hand at the time but will aim to take a proper measurement this week, I believe it to be a 3.5" bore and tailpipe.

Cheers,
Rhys

[boeb]

Kl mate it not bk box bore a mean its bore on down pipe and centre section if u no wot a mean lol...most are 2.5 inch am looking for a 3 inch

[robotrhys]

Yes, I know what you mean mate. I would say it was a 3" bore all the way through with a 3.5" tailpipe but will take measurements.

[robotrhys]

Main post has been updated.

Cheers,
Rhys

[robotrhys]

Kl mate it not bk box bore a mean its bore on down pipe and centre section if u no wot a mean lol...most are 2.5 inch am looking for a 3 inch

Hi mate,
I've measured the exhaust system, the backbox has a 3" inwardly rolled tailpipe and the rest of the system has a 2.5" bore throughout.

One forum post I've read stated that..
"A fully decated 2 ½” bore system is adequate up to 350 bhp. After this a 3” system is recommended. Sports cat systems are available but ultimately still limit power compared to a fully decated setup".

What power are you running/planning to run?

Cheers,
Rhys

[mikeymikeyp]

244mm is about as big as you can go on a 13" wheel whilst leaving enough space for the caliper!

its got 260mm on the 13s the now bud running rs 2000 calipers

[robotrhys]

I am selling the calipers seperately so you're still able to buy whichever size discs you like to go with them.

Thanks for all the interest so far, PMs all replied to.
Rhys

[griffo69]

Do you know if the clutch release bearing will work on a s1 box

[robotrhys]

Do you know if the clutch release bearing will work on a s1 box

Hi Griffo, I would expect this will fit both S1 and S2 as many adverts on ebay state that clutch kits including the release bearing are suitable for both. I'm sure someone else on the forum will be able to confirm this.

Link to one of the items: http://www.ebay.co.uk/itm/280677123921

Thanks,
Rhys

[robotrhys]

New items have been added to the main post.

Thanks,
Rhys

[robotrhys]

Pipercross performance air filter has just been sold. Main post has been updated, more good stuff coming soon.

Thanks,
Rhys

[Brianscotty]

Hi there, Are the Avo springs still for sale?

[Max M4X WW]

Are the FRST clocks for an OFAB or OFAC car?

Cheers

[robotrhys]

Are the FRST clocks for an OFAB or OFAC car?

Cheers

No idea I'm afraid, they came with the car when I bought it. It was a 1991 J Reg Fiesta RS Turbo.

[Max M4X WW]

Do you have any engine bay photos?

[robotrhys]

Here we are matey..

[rsturbonutter]

Are the boost andcoolant hoses available from the engine mate