New stainless steel rear anti roll bar barckets
60 posts • Page 1 of 2 • 1, 2
New stainless steel rear anti roll bar barckets
As some of you may know by now, ford in their wisdom have stopped making the rear anti rollbar brackets for the mk3 fiesta and as they rust away and break causing the car to fail its MOT, this is a bit of an issue!
My mate, however, has managed to find a guy who will make stainless steel ones (which are actually better than the ford ones) as can be seen in the pics below.
As you can see they are very very good replica parts and ideal if your car fails an MOT on these brackets.
Prices are £6 each if they are bought separately
Post up here if you are interested
My mate, however, has managed to find a guy who will make stainless steel ones (which are actually better than the ford ones) as can be seen in the pics below.
As you can see they are very very good replica parts and ideal if your car fails an MOT on these brackets.
Prices are £6 each if they are bought separately
Post up here if you are interested
Last edited by Dave G fsi on Mon Jan 10, 2011 9:20 pm, edited 1 time in total.
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
- RS rob
- Elite Post Master
- Posts: 4176
- Joined: Tue Feb 18, 2003 1:16 am
- Location: south wales
Re: New stainless steel rear anti roll bar barckets
i might be interested i could fit my second arb then
does he do the two different ones i.e the strut bolt and the other clamp one near the H section as one doesnt have a spacer in it
does he do the two different ones i.e the strut bolt and the other clamp one near the H section as one doesnt have a spacer in it
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
Yes he does do both matey
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
ah, how much for the 4?
would he/you do £15 posted for the 4?
would he/you do £15 posted for the 4?
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
I'm interested please pm details when they are available
- admanRS
- Newbie Poster
- Posts: 39
- Joined: Thu Jan 25, 2007 11:16 pm
Re: New stainless steel rear anti roll bar barckets
any news on them yet mate?
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: New stainless steel rear anti roll bar barckets
im interested in this too, let me know the price for 4 posted to coventry. also are these shaped differently for the side brackets and the middle brackets? are these stronger than the factory ford ones and will they snap like the ford ones do? original ford ones cost £2.65p inc vat from ford.
1.6 si
- Mav Singh
- Elite Post Master
- Posts: 1233
- Joined: Sun Dec 29, 2002 3:15 am
- Location: West Midlands
- Your car: 1995 Fiesta Si 1.6
Re: New stainless steel rear anti roll bar barckets
il be interested in a set aswell buddy if you can do a price for 4 posted to margate
- russ-RST
- Elite Post Master
- Posts: 1438
- Joined: Thu Apr 01, 2010 11:05 am
- Location: margate kent
- Your car: fiesta rs turbo
Re: New stainless steel rear anti roll bar barckets
I'm interested in a set of these (all 4) as I have not been able to fit my rear ARB due to the old ones snaping.
Cheers
Cheers
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
Re: New stainless steel rear anti roll bar barckets
Brilliant! Make sure you put plenty of copper grease on the bolts to prevent galvanic corrosion.
- Excursion
- Bulletin Board User
- Posts: 15228
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Skynet
- Your car: Ford Fiesta
Car: 1990 Ford Fiesta XR2i
Re: New stainless steel rear anti roll bar barckets
hi mate i will buy 4 off you if thats ok can i pay thru paypal bud pm me or summert cheers
- white1408
- Newbie Poster
- Posts: 19
- Joined: Tue Jun 29, 2010 10:23 pm
Re: New stainless steel rear anti roll bar barckets
i need 1 please can you email me payment details please.
- simon turbo
- Post Master
- Posts: 767
- Joined: Sat Feb 06, 2010 7:24 pm
- Location: Cambridgeshire
- Your car: fiesta rst, ka,fiesta o8
Re: New stainless steel rear anti roll bar barckets
Sorry for the delay one these guys, ash is messing me around abit.
I will keep you all updated as to what is going on once I have sorted it out with him
I will keep you all updated as to what is going on once I have sorted it out with him
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
whats going on with these i could really do with them whilst i have the money rear arb would be nice
- russ-RST
- Elite Post Master
- Posts: 1438
- Joined: Thu Apr 01, 2010 11:05 am
- Location: margate kent
- Your car: fiesta rs turbo
Re: New stainless steel rear anti roll bar barckets
I'll also take a set mate
2014 Fiesta ST3 & Mk6 Fez ST
- mrorange2
- Elite Post Master
- Posts: 2807
- Joined: Sat Dec 03, 2005 7:42 pm
- Location: Doncaster\Scunthorpe
- Your car: 2014 Fiesta ST3, Mk6 Fez ST
Re: New stainless steel rear anti roll bar barckets
Right then guys, sorry for the delay, have spoken to Ash today and I'm going to get them all off him on 27th Feb when I next see him then I can organise dispatching them rather than being the middle man.
If you dont mind waiting till then I can get them all posted out to you all when I have got hold of them on 27th
If you dont mind waiting till then I can get them all posted out to you all when I have got hold of them on 27th
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
ah brilliant, right on my pay day
is there a discount for buying a set of 4? like i asked at about £15 for four posted?
i can fit my 2nd arb then
is there a discount for buying a set of 4? like i asked at about £15 for four posted?
i can fit my 2nd arb then
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
They are £6 each, £24 for the set. Thats the best they can be done for due to cost of materials and labour making them
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
surely yhe/you can do a discount for buying the 4? knock a pound of each one or so?
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
Will chat to Ash when I see him and let you know if there is any flex in the price for four, but as it stands until then they are £6 each
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
cheers mate
bet you've ordered some for all 3 of your viable mk3s?
bet you've ordered some for all 3 of your viable mk3s?
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
have you found out any more info on these??
- russ-RST
- Elite Post Master
- Posts: 1438
- Joined: Thu Apr 01, 2010 11:05 am
- Location: margate kent
- Your car: fiesta rs turbo
Re: New stainless steel rear anti roll bar barckets
Dave G fsi wrote:Right then guys, sorry for the delay, have spoken to Ash today and I'm going to get them all off him on 27th Feb when I next see him then I can organise dispatching them rather than being the middle man.
If you dont mind waiting till then I can get them all posted out to you all when I have got hold of them on 27th
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
changed my mind, only 2 for me please, for now
found my two steel ones the other day
found my two steel ones the other day
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: New stainless steel rear anti roll bar barckets
OK then mate
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
I would be interested in a rear set, has he considered making the fronts aswell? would also be interested in those aswell. Sorry for the lateness of joining this thread but i only spotted it today.
- Jay001
- Poster
- Posts: 61
- Joined: Sun May 09, 2010 10:16 pm
- Location: Manchester
- Your car: Fiesta RST
Re: New stainless steel rear anti roll bar barckets
Ok then mate, no worries
Front ones arnt as much as a problem tbh, none of my mk3's have ever had them as a problem, maybe just sand them back an paint them mate? Or are they cracked/past it?
Front ones arnt as much as a problem tbh, none of my mk3's have ever had them as a problem, maybe just sand them back an paint them mate? Or are they cracked/past it?
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
only just spotted this
yeah i'm intersted
yeah i'm intersted
- rsonblackwheels
- Post Master
- Posts: 787
- Joined: Tue Nov 13, 2007 10:16 am
- Location: near basingstoke hampshire
Re: New stainless steel rear anti roll bar barckets
Ok then mate
Will sort stuff out with everyone once I have the Items next Sunday
Will sort stuff out with everyone once I have the Items next Sunday
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: New stainless steel rear anti roll bar barckets
Dave G fsi wrote:Ok then mate, no worries
Front ones arnt as much as a problem tbh, none of my mk3's have ever had them as a problem, maybe just sand them back an paint them mate? Or are they cracked/past it?
No not knackered but would loo good againt powder coated subframe so just wondered.
- Jay001
- Poster
- Posts: 61
- Joined: Sun May 09, 2010 10:16 pm
- Location: Manchester
- Your car: Fiesta RST
Re: New stainless steel rear anti roll bar barckets
can I still get a set of these?
- Spanish_1.1
- Poster
- Posts: 177
- Joined: Wed Sep 28, 2005 8:41 pm
Re: New stainless steel rear anti roll bar barckets
I need two Set´s please
You´ve got a PM Dave
Greets
Daniel
You´ve got a PM Dave
Greets
Daniel
- FiestaFBJ
- Newbie Poster
- Posts: 16
- Joined: Fri Aug 19, 2011 5:10 pm
- Location: near Frankfurt, Germany
- Your car: Fiesta FBJ
Re: New stainless steel rear anti roll bar barckets
ill take a set of these can you pm me the details please
cheers
cheers
- fiesta23
- Newbie Poster
- Posts: 7
- Joined: Wed Mar 30, 2011 2:26 pm
- Your car: ford fiesta
Re: New stainless steel rear anti roll bar barckets
Can I get one of these?
- russ-RST
- Elite Post Master
- Posts: 1438
- Joined: Thu Apr 01, 2010 11:05 am
- Location: margate kent
- Your car: fiesta rs turbo
60 posts • Page 1 of 2 • 1, 2
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 23:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.