heeman's AP paddle clutch manual adjust pedal mod guide

Please check here before posting to see if your question has been answered before.

heeman's AP paddle clutch manual adjust pedal mod guide

Postby heeman10 on Tue Mar 28, 2006 7:38 pm

DaveRom has posted a similar guide, but I did mine differently, and, I think, it's a better way of doing it. My opinion, you now have two guides to choose from though! His has more pretty pictures :lol:

Background: When fitting the AP 4 paddle clutch, the company recommend you carry out this modification. The standard auto-adjust pedal's ratchet system can't take the additional pressure of the high-pressure clutch cover used with the paddle clutch, and they give up as mine did. Basically, your gears will become hard to engage, then your pedal will go to the floor and you'll have no clutch at all, so do this modification!

Parts: You need the Ford Fiesta manually adjustable clutch pedal, and you might as well get a new quadrant, though it's not really necessary as far as I can see. EDIT: The quadrant is the most important part of this conversion! The Escort quadrant is a larger radius, and therefore gives more cable retraction. Do not miss this step out or you will/may not achieve full release of the clutch! You might as well replace the clutch cable while you're down there too, same goes for the two bushes that sit in the pedal, pics to follow.

Some FINIS codes (may be out of date, Andy.B will kindly check them shortly):

Clutch pedal = 7304014 (£25.52 as of July 2006)
Pawl/quadrant = 7346848 (£2.32 as of July 2006)
Rod assembly/clutch rel. = 7304020 (£2.71 as of July 2006)
Screw special = 7304012 (£1.77 as of July 2006)

And here's a Microcat screenshot donated to the guide:

Image

Tools required: 13mm spanner (ratchet spanner saves hassle), and long nosed pliers.


Method: Having spoken to at least two other guys who did this, they chose to remove the dash and pedal box in their entirity to help access. As I had to perform the mod with limited space and time, I chose to leave both in position. At least one removed the steering column too, something else I left in position also.

1. Remove the driver's seat (4x10mm bolts).

2. Unhook the clutch cable at the gearbox end using needle nose pliers.

3. Lie on your back in the car, and get your head under the dash. Pull off the black plastic heater hose that comes out from the centre of the dash and across to the driver's side heater vent.

4. Use the pliers to flick the clutch cable nose off the black plastic quadrant. This is one of the more fiddly operations. The pic below shows the heater hose mentioned in Step 3, and the cable nose mentioned in Step 4:

Image

5. Use the pliers again to flick off the spring clip on the end of the shaft nearest the clutch pedal.

6. Now the clutch cable is free of the pedal, go back round to the front of the car (jack it up and place on axle stands) and pull the cable out of the bulkead from the engine bay.

7. Undo the two 13mm nuts that hold the clutch cable bracket to the rest of the pedal box. The pic below shows this bracket. The 13mm nuts fasten onto the ends of the two studs shown. The clutch cable is withdrawn from the bulkhead in Step 6 to free it from the back of the bracket, so the bracket can now be removed. This bracket slides over the end of the shaft, and can be removed once the nuts and spring clip are removed in Steps 5 and 6. If this operation is difficult, it may help to loosen off the two 13mm nuts at the roof of the footwell which secure the pedal box to the car (they sit in slotted sliders) and the two 13mm nuts on the bulkead in the engine bay, to the right of the header tank. These two nuts sit one above the other, about 20cm apart, and can be a bit tricky to get to. Loosening these four nuts in total will give a bit of freedom of movement should it be needed.

Image

8. With the bracket off (can be a bit fiddly), the clutch pedal will now slide off. If you have new bushes and quadrant, fit these to the manual pedal, and slide the new pedal onto the shaft. (The spring and ratchet clicker from the auto pedal aren't required) The pic below shows the standard quadrant, standard pedal, manual adjust pedal (many thanks to Scort for making one for me, but the Ford part should be the same I believe) and my fabricated aluminium quadrant (again, big thanks to Scort, though it couldn't be used in the end, and isn't actually required...hmmm.. ):

Image

9. Replace the clutch pedal bracket, nuts and clip. I cheated and tapped one of the studs out of the bracket with a hammer to make the job easier.

10. Re-introduce the clutch cable (or fit new cable) through the bulkhead.

11. Fit the cable nose to the quadrant (gearbox end of the cable left off for this).

12. Fit the gearbox end of the cable. You may find you need to play with the position of the gearbox lever arm by removing the pinch bolt and trying to lever on different splines. Adjusting the clutch pedal is a play-off between the gearbox lever arm position and the adjustability via the adjusting bolt on the front of the clutch pedal.

13. Replace gearbox lever arm pinch bolt, and have a feel of the pedal. Screw the adjusting bolt in and out depending on the amount of travel required, and make sure the locking nut is done up tightly to prevent the pedal position adjusting itself while on the move.

14. Replace the heater hose under the dash. Probably THE fiddliest part of the operation. I still haven't got mine back on! :lol:

I think that's everything. The Ford part number for the pedal will hopefully be in this thread shortly. Do NOT order the pedal suggested by AP on their website, as that is an Escort pedal and doesn't fit the Fiesta properly.

Hopefully I haven't left any details out and this guide will help some people! Come back and let me know if there are any problems, though I think only about two people a year carry out this modification. Good luck :D



heeman10 and Andy.B, educating the FT masses*


*That's "masses", not "massive", before all you widebois out there start bigging yourselves up because someone said massive!
Last edited by heeman10 on Thu Dec 21, 2006 5:11 pm, edited 4 times in total.
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby Andy.B on Tue Mar 28, 2006 7:53 pm

Yes will be doing this soon as said on MSN. Better go get the new clutch pedal as the one i have is not the right one... So your saying that my clutch pedal and mk5 quadrent isnt needed??? or can i still use the modified quadrent and the fiesta manual adjustable clutch pedal???
Image
Andy.B
Elite Post Master
Elite Post Master
 
Posts: 1434
Joined: Thu Oct 04, 2001 1:00 am
Location: Deeper Underground

Postby heeman10 on Tue Mar 28, 2006 9:02 pm

Yeah, you need the Fiesta pedal, the Escort one just isn't any use. The left hand kink places the pedal pad just millimetres clear of the centre console, as DaveRom found out. It's likely the Escort quadrant will work with the Fiesta pedal, bit of a gamble you could probably take. The modification to the Escort quadrant turns it into a 180-degree semicircle doesn't it? So it should be the same as the Fiesta one afterwards :)
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby xrsi on Tue Mar 28, 2006 10:45 pm

really really really do still think that the way i have done it is alot easier and less time consuming.

all i did was get the complete pedal box from a fiesta clasic and simply swap the two over, dont need to remove anything apart from the 4 bolts that hold it in to the car! dont have to play with bushes or removing other bits and you know that its all in correctly and right.... plus i bet an arm and a leg that mine was alot cheaper!


edited
out of interest tho, why do you not need the auto adjust paw?
xrsi
XR(ustyAtTheMo)SI
XR(ustyAtTheMo)SI
 
Posts: 7351
Joined: Thu Jan 01, 1970 1:00 am
Location: shropshire

Postby heeman10 on Tue Mar 28, 2006 11:01 pm

James - How can that be easier? Either way, the clutch cable has to be disconnected. You would also need to disconnect the throttle cable and brake pedal, whereas the way I did it I just had to remove the clutch pedal. You had to remove the whole box, where I just slid the new pedal on. So all I had to remove was a pedal, look how much you had to do! I don't know what "don't have to play with bushes" is about, sorry :-? My job cost me the price of a pedal, modified by Scort. £10-£15 for the pedal. Sorry, don't really see what you're getting at, and cannot agree that removing two pedal boxes and installing a new one is faster and/or easier than what I did!

The auto adjust pawl/ratchet system is no longer required, as the pedal is now manually adjusted.
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby p4blo on Tue Mar 28, 2006 11:08 pm

Nice guide sir :)

You're right about that damn heater pipe, still cant get mine on after having it off to change the clutch cable. Needless to say it involved a heater of sorts, some long pieces of wood and a lot of swearing, but it still refuses to go back on :(
Image
p4blo
Senior Poster
Senior Poster
 
Posts: 311
Joined: Sat Oct 01, 2005 10:16 pm
Location: Dooooorset Drives: 1.6 16v

Postby mike_wall15 on Tue Mar 28, 2006 11:19 pm

Looks a good guide Jim-lad! In fact, it looks so simple I'm almost tempted to go outside and change mine :D :lol: ...

....nah, think I'll leave it! :lol:

Plus, more of a Hydraulic Clutch person now :bonkers: :aviator:
Image
mike_wall15
Elite Post Master
Elite Post Master
User avatar
Posts: 6475
Joined: Fri Jul 18, 2003 7:17 pm
Location: Land of the Stars!

Car: 2002 BMW M3

Postby heeman10 on Tue Mar 28, 2006 11:20 pm

p4blo - Can I borrow your bits of wood and try them on mine? :lol:

Wall - I hope you spring a leak :p
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby xrsi on Tue Mar 28, 2006 11:24 pm

its easier cos i was going to get the bits from ford so have dismantled the pedal box in the car and its a complete ball ache compaired to undoing the 4 bolts, uncliping the clip off the brake pedal and undoing the 2 cables. i timed myself taking the one off from scrap yard and refitting and it took less time than for me to dismantle the pedal to fit the new bits as it is soo fiddle and generally a right pain to do in situe.

oh yeah, thought you meant that you have removed the paw for the manual adjust and read it wrong. By palying around with bushes, the plasitc bush that the pedal slides through is the bush and they are a pain to get in and stay in if they come out at all (well they were on mine!)

the whole pedal box didnt cost me £10, as for time and ease just one of those things tho mate, everyone finds somethings easier or quicker....
xrsi
XR(ustyAtTheMo)SI
XR(ustyAtTheMo)SI
 
Posts: 7351
Joined: Thu Jan 01, 1970 1:00 am
Location: shropshire

Postby mike_wall15 on Tue Mar 28, 2006 11:24 pm

heeman10 wrote:Wall - I hope you spring a leak :p


Within the next 6 months yes! :D
6 months and 1 day.... :x :cry: :(

Joys of a warranty :lol:
Image
mike_wall15
Elite Post Master
Elite Post Master
User avatar
Posts: 6475
Joined: Fri Jul 18, 2003 7:17 pm
Location: Land of the Stars!

Car: 2002 BMW M3

Postby Excursion on Tue Mar 28, 2006 11:27 pm

Excellent guide Heeman10

I've just been out to try this on my Mk5, and I got stuck after all the liquid stuff came out when I removed the pedal. WHAT DOES IT ALL MEAN?

Can we have a guide?
Excursion
Bulletin Board User
Bulletin Board User
User avatar
Posts: 15228
Joined: Thu Jan 01, 1970 1:00 am
Location: Skynet
Your car: Ford Fiesta

Car: 1990 Ford Fiesta XR2i

Postby heeman10 on Tue Mar 28, 2006 11:30 pm

You disturbed the PINIS reservoir! Replace it immediately and rotate the grublocking screw four semi-rotations anti-counterclockwise at once!! Disconnect the battery after each semi-rotation, and re-connect after each full rotation. WEAR EYE PROTECTION.
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby mike_wall15 on Tue Mar 28, 2006 11:31 pm

Mark - Think you need to put a bucket underneath to catch it all, then when it's all changed put it into the brake reservoir under the hood :)

HTH, Mike :D
Image
mike_wall15
Elite Post Master
Elite Post Master
User avatar
Posts: 6475
Joined: Fri Jul 18, 2003 7:17 pm
Location: Land of the Stars!

Car: 2002 BMW M3

Postby heeman10 on Wed Mar 29, 2006 1:32 pm

xrsi wrote:its easier cos i was going to get the bits from ford so have dismantled the pedal box in the car and its a complete ball ache compaired to undoing the 4 bolts, uncliping the clip off the brake pedal and undoing the 2 cables. i timed myself taking the one off from scrap yard and refitting and it took less time than for me to dismantle the pedal to fit the new bits as it is soo fiddle and generally a right pain to do in situe.

oh yeah, thought you meant that you have removed the paw for the manual adjust and read it wrong. By palying around with bushes, the plasitc bush that the pedal slides through is the bush and they are a pain to get in and stay in if they come out at all (well they were on mine!)

the whole pedal box didnt cost me £10, as for time and ease just one of those things tho mate, everyone finds somethings easier or quicker....

Sorry, I'm just going to have to agree to disagree with you, my way's easier and faster :lol: :p
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby John_D on Wed Mar 29, 2006 2:47 pm

hi, sorry for being a total tit but what does this mod do?
John_D
Elite Post Master
Elite Post Master
 
Posts: 1007
Joined: Sat Nov 12, 2005 7:09 pm
Location: Fife

Postby xrsi on Wed Mar 29, 2006 3:20 pm

it makes the pedal a manual adjustment type not the auto adjust that is found on most mk3 and mk3.5 fiesta's and is better in coping with padle clutches!

and james - :rolleyes: :P
xrsi
XR(ustyAtTheMo)SI
XR(ustyAtTheMo)SI
 
Posts: 7351
Joined: Thu Jan 01, 1970 1:00 am
Location: shropshire

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby heeman10 on Wed Mar 29, 2006 5:43 pm

John_D wrote:hi, sorry for being a total tit but what does this mod do?


heeman10 wrote:Background: When fitting the AP 4 paddle clutch, the company recommend you carry out this modification. The standard auto-adjust pedal's ratchet system can't take the additional pressure of the high-pressure clutch cover used with the paddle clutch, and they give up as mine did. Basically, your gears will become hard to engage, then your pedal will go to the floor and you'll have no clutch at all, so do this modification!


This mod replaces the standard auto adjust clutch pedal found on most Mk3s with the later manual adjust pedal, which does away with the weak ratchet system, and allows you to manually adjust the height of the pedal.
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby Captain Tightpants on Thu Mar 30, 2006 12:10 am

Nice one mate! :)

Glad it all worked out ok.

Steve
Image
Captain Tightpants
Elite Post Master
Elite Post Master
User avatar
Posts: 3723
Joined: Fri Feb 20, 2004 8:25 pm
Location: Somerset

Postby Andy.B on Fri Mar 31, 2006 7:50 pm

I can confirm those Finnis numbers are correct but there may be more to be added :lol:
Image
Andy.B
Elite Post Master
Elite Post Master
 
Posts: 1434
Joined: Thu Oct 04, 2001 1:00 am
Location: Deeper Underground

Postby heeman10 on Thu Apr 06, 2006 2:29 am

Scort wrote:Nice one mate! :)

Glad it all worked out ok.

Steve

Yeah, thanks a lot for your hard, and very fast work sorting out my manual adjust pedal and the ally quadrant. So sorry I couldn't make use of that in the end :( Very kind of you, I WILL find some way of paying you back for all this goodness you baxtered!!! :lol: :x :)
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby RoryT on Thu Apr 06, 2006 7:22 pm

Andy B, was just looking at your car on the DJstalker galleries.
It has to be said that it looks sweet and i want those side repeaters.
where can i get them from?
RoryT
Senior Poster
Senior Poster
 
Posts: 235
Joined: Tue Nov 01, 2005 10:21 pm
Location: Blackpool/Manchester

Postby jdfiesta on Mon Jul 03, 2006 12:39 pm

just been and ordered the bits to do this conversion
ordered the following
7021871 - Bush X2 0.78
7346848 - Pawl Quadrant 2.32
7304014 - Pedal Clutch 25.52
7304020 - Rod Assy 2.71
7304012 - Screw Special 1.77
. Total:£33.10 +vat

JJ
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec
Image

Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!
jdfiesta
Elite Post Master
Elite Post Master
 
Posts: 3731
Joined: Thu May 15, 2003 2:34 pm
Location: Doncaster
Your car: V70 T5

Postby rich_frst on Mon Jul 17, 2006 11:29 am

nice guide homey!!!! :D

will the pedal 'assembly' (if you like) be correct from the mk 3.5 fiesta lx that i'm breaking?? could pince it out of that....??

rich :bonkers:
My ProjectS..
Image
viewtopic.php?t=97195&start=0

FORD SPARES - ENGINES-PANELS-TRIM ESCORT/FIESTA/SIERRA ETC RS/COSWORTH/XR
rich
07834862431
rich_frst
Elite Post Master
Elite Post Master
 
Posts: 2792
Joined: Tue Mar 09, 2004 2:28 pm
Location: benfleet, Essex
Your car: mk1 sierra cos, mk2 escort est

Postby blackierst on Wed Aug 09, 2006 11:45 pm

arse burtons have sent me the escort pedal... grrrrrr

Finis code 1029012 :x
Image
blackierst
Senior Poster
Senior Poster
 
Posts: 331
Joined: Fri Jun 16, 2006 7:27 pm
Location: Milton Keynes

Postby blackierst on Wed Aug 23, 2006 2:01 pm

Dunno if this is anygood to anyone but just got all the parts through from ford so have taken a few pictures to help you when you come to buy them (mke sure they give you right bits lol)


7304014
Image

7346848
Image

7304020
Image

7304012
Image

7021871
Image
Image
blackierst
Senior Poster
Senior Poster
 
Posts: 331
Joined: Fri Jun 16, 2006 7:27 pm
Location: Milton Keynes

Postby blackierst on Sun Aug 27, 2006 1:43 pm

just thought id add this link so people can see what it looks like when you use all of the ford parts :)

http://www.fiestaturbo.com/forums/viewt ... p?t=137595
Image
blackierst
Senior Poster
Senior Poster
 
Posts: 331
Joined: Fri Jun 16, 2006 7:27 pm
Location: Milton Keynes

Postby heeman10 on Wed Sep 13, 2006 2:59 pm

Thanks for all the updates, the more pictures/recent prices/correct part numbers etc the better :)
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby M4tty on Thu Jul 26, 2007 10:04 pm

Can someone check to see if these are the same Codes? :) Gonna give it a whirl!!
Image
M4tty
Elite Post Master
Elite Post Master
 
Posts: 1152
Joined: Sun Mar 09, 2003 8:06 pm
Location: Hexham, Northumberland

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby GavStyli on Tue Feb 22, 2011 11:04 pm

many thanks sheman, i shall be trying this out shortly! :)
GavStyli
Elite Post Master
Elite Post Master
User avatar
Posts: 3196
Joined: Sat Mar 30, 2002 12:00 am
Location: palmers greek
Your car: Fiesta Turbo

Car: 1991 Ford Fiesta RS Turbo

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby mikeymikeyp on Sun Mar 11, 2012 11:48 pm

going to be doing this and im just checking I can make my own pedal by drilling a bolt in and welding a nut on the pedal so that it moves the bigger part of the ratchet do i still need to use the smaller bit of the ratchet u know the bit that has the small spring wraped around it
mikeymikeyp
Elite Post Master
Elite Post Master
 
Posts: 1796
Joined: Thu Oct 29, 2009 9:01 pm
Location: hamilton thats scotland

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby TIL13R on Wed Jan 09, 2013 7:54 pm

B******S..... I ordered all the bits of the Escort mk5 pedal...!!!
TIL13R
Elite Post Master
Elite Post Master
 
Posts: 3680
Joined: Fri Mar 21, 2003 2:50 pm
Location: bedFORDshire, Drives: Xr2i 8v

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby GavStyli on Wed Jan 09, 2013 8:05 pm

didnt work for you tiler?
GavStyli
Elite Post Master
Elite Post Master
User avatar
Posts: 3196
Joined: Sat Mar 30, 2002 12:00 am
Location: palmers greek
Your car: Fiesta Turbo

Car: 1991 Ford Fiesta RS Turbo

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby TIL13R on Wed Jan 09, 2013 8:15 pm

Ived not tried it yet gav tbh... i have brought

http://extremesportsproducts.com/Galler ... ctions.pdf

Really great bit of kit.. Just thinking it might not work with the fiesta....
TIL13R
Elite Post Master
Elite Post Master
 
Posts: 3680
Joined: Fri Mar 21, 2003 2:50 pm
Location: bedFORDshire, Drives: Xr2i 8v

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby AW0L on Wed Jan 09, 2013 8:20 pm

[quote="TIL13R"]Ived not tried it yet gav tbh... i have brought

http://extremesportsproducts.com/Galler ... ctions.pdf

Really great bit of kit.. Just thinking it might not work with the fiesta....[/quote]

i had the same pedal (not that kit though. gen ford), it does fit but moves the pedal left almost touching the centre console... i have a spare fiesta manual adjustment pedal with the white knob on it
AW0L
Post Master
Post Master
 
Posts: 585
Joined: Sun Sep 04, 2011 9:01 am
Your car: ford fiesta 1.8 xr2i

Re: heeman's AP paddle clutch manual adjust pedal mod guide

Postby pauldolman on Mon Jan 11, 2016 10:59 pm

can someone tell me the right adjustable pedal to buy please to do this mod

i can only seem to find the mk5/6 escort one with the adjustment on it which is no good for a fiesta
pauldolman
Post Master
Post Master
 
Posts: 916
Joined: Mon Feb 24, 2003 12:08 am


Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.