fiesta rs turbo, updated, 29/03/16

Post pics of your Fiesta here.

fiesta rs turbo, updated, 29/03/16

Postby jayrs on Sat Jan 07, 2006 12:26 pm

was planing a zetec turbo but due to time, money, kids etc i have now dropped that idea and am sticking with the cvh lump.

im not doing a full car rebuild as such as others have done, i would if i had the time and money but i havent.

so due to a big end shell throwing its toys out the pram the engine started to knock a bit, i replaced the shells just to get me over xmas as i planned the rebuild for about now to start, but when i started it up the turbo was gone, how and why fook knows but even a rebuild kit didnt sort it so might be something like to my oil pressure as it stops when cars warm, anyhow back to it, becausse of it all the car is now off road to be sorted.

i have some issues with panles, so they will be replaced, the filler panle is only just starting to bubble, not much but you can bet its 10 time worse on the inside! so thats coming out and new one in.
seats are being retrimmed in leather ( thanks to my mum, good old mum :lol: ) and me and my dad will do the engine and the body work, and my father in law has offered to spray it for me as hes a sprayer by trade :D

will inlist the help of some mates as i want the car ready for the summer, not counting my chickens but if i dont set some sort of limit it wont get done :lol: .

will post pics of the work as it gets done etc.

starting the first stage today, strip the inside out, this is so my mum can start when she can and stops the seats going manky where its left

plan is to strip it all out, body kit, seats engine etc and start on the under side getting that re-undersealed and tank/axal panited etc.

here are some pics of the car as it stands ( some are olded pic's)


Image
Image
Image
Image
Image
Image
Image
Image
Last edited by jayrs on Wed Dec 15, 2010 11:32 am, edited 104 times in total.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby heeman10 on Sat Jan 07, 2006 2:55 pm

Second pic is very nice :) Good luck with it, keep us filled in! :D
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby mike_w on Sat Jan 07, 2006 3:23 pm

very nice
mike_w
Post Master
Post Master
 
Posts: 988
Joined: Fri Dec 09, 2005 8:47 pm
Location: Burscough, north west lancashire

Postby MAD_Adamski on Sat Jan 07, 2006 4:30 pm

heeman10 wrote: keep us filled in! :D


you just cant help yourself james :o :rolleyes:

apart from james sick comment looks real good dnt do a me and take 2 yrs tho :) :lol:
Image
MAD_Adamski
Elite Post Master
Elite Post Master
 
Posts: 4475
Joined: Thu Sep 19, 2002 6:28 pm
Location: birmingham/shropshire Drives:Fiesta RS, Escort cosworth

Postby heeman10 on Sat Jan 07, 2006 4:37 pm

Get lost you bimbo<hav!
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby MarkRS2K on Sat Jan 07, 2006 4:49 pm

good stuff mate, you doing a standard rebuild on the cvh then?
Image
MarkRS2K
Elite Post Master
Elite Post Master
 
Posts: 3567
Joined: Wed Jan 28, 2004 9:27 am
Location: London baby.....

Postby jayrs on Sun Jan 08, 2006 12:22 pm

cheers guys.

yes mate, standard rebuild on the cvh, will be done right, new cam, pistons etc etc, , ported polished, balanced all that mate.

interiors out as is the boot instal, that weighted a fooking ton so thats about 30bhp back :lol: , na gunna redo that anyway and will do it in 6mm not the 10mm is it at the mo.

ordered up the cream leather yesterday for the head lining and seat piping, once ive got my redundancey money through, the black leather for the seats will be ordered along will all the other bits and bobs then its a case of doing the parts of the car as and when.

was gunna drop the engine today but its pi$sing with rain so not gunna bother, will do it next week if weathers ok, can see the old gazebo coming out again, :lol: :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sun Jan 08, 2006 12:25 pm

heeman10 wrote:Second pic is very nice :) Good luck with it, keep us filled in! :D


it doesnt show, but there is a fooking great round key mark on my bonnet thanks to some little c u n t! :x shame i didnt find who dome it as they would have broken hands and fingers and face etc by now, :lol:

you can see it better in this pic

Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby heeman10 on Sun Jan 08, 2006 1:00 pm

NOBS :x I'd gladly give them a taste of cross man's knuckles too!!! :x
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby knuckles on Sun Jan 08, 2006 1:06 pm

Is that a escort cosworth front bumper you have there ?

Just wondered if you had any problems fitting it cos i considered getting one a while back.... :rolleyes:
ImageImage
~nomad~ wrote:Good god I love Clark.
knuckles
Elite Post Master
Elite Post Master
User avatar
Posts: 6841
Joined: Thu May 19, 2005 2:40 pm
Location: Hertfordshire
Your car: Fiesta Rs turbo

Postby jayrs on Sun Jan 08, 2006 1:07 pm

:lol: , prob some kid as they done a brand new car 3 doors down, maybe they had something against red cars :-? onces its sprayed up anyone keys it im cracking out the 12 bore :devil:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sun Jan 08, 2006 1:32 pm

knuckles wrote:Is that a escort cosworth front bumper you have there ?

Just wondered if you had any problems fitting it cos i considered getting one a while back.... :rolleyes:


it is mate, when i had it sprayed the guy offered to fit it as he sprayed my bonnet at the same time ( got the hole and line filled in) so it was his problem, lol, but he never said it was a fooker to fit so guess it went on ok.

in saying that i did help a mate fit his a while back and thay was a bit of a fooker as it needed triming etc.
remember that all these things are knocked out quick and cheapley, and trimmed rough, final trimming and fitting is down to you mate but its easy to do and TBH the only parts your need to trim would be the coner bits as it folds round the front panle to wing, maybe along that lenth and maybe the corner bit as it goes into wheel arch, but it wont be much i reckon.
fitting the lights is the c**t of the job as theres not really enough space for them to fit, unless you mod the light, dent in/cut front panel
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby :: blade :: on Tue Jan 10, 2006 10:06 pm

looking good mate, keep up the good work :D

:: blade ::
Drives: Generation 6 Toyota Celica GT
:: blade ::
Elite Post Master
Elite Post Master
 
Posts: 2138
Joined: Tue May 24, 2005 3:32 pm
Location: manchester

Postby jayrs on Tue Jan 10, 2006 10:10 pm

cheers mate, will get a pic of the work so far (see above) and if its not raining this weekend i plan to drop the engine out, get it up and strip all the stuff off underneath, tank, axle etc and start preping it readed for a new coat of underseal or 2 :bonkers:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Jan 11, 2006 11:52 pm

plan for this weekend is to drop the engine, get the car up in the air, drop the rear axle and fuel tank, and all the bits in the way, prep it ready for new under seal

will paint the tank and rear axle also.



thats a point, anyone know how to get the fuel lins off the connector on the tank?
haynes say you need a special tool or something.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby heeman10 on Thu Jan 12, 2006 12:20 am

Warm them up and pull them off! I replaced mine with new rubber fuel lines anyway. The top of the tank needs a "special tool", also known as a drift and a delicate touch with a hammer :)
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby jayrs on Thu Jan 12, 2006 9:59 pm

lol, and getting them back on? lol

was thinking of changing them over to braided lines, not all the way through, just to the main metal lines, but really i only need to get them off once so i can shift the tank, after that they would (hopefully) never need to come off again.

think before i fook mine up ill go down scrappy and practice :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sat Jan 14, 2006 9:39 pm

right been out to it today, after all the pis$ing about prob only got a few hours of work in, started at 12, had to put up a cover, started on it only to find i had forgot to ask my dad to grab the engine hoist from my uncles place :( so my dad and 1 of my mates went off to grab it, so me and my other mate were left there for hour and half taking little bits that didnt really have to come off, off like starter, coils pack etc just something to pass the time, but still all i got to do tomorrow is all the bits underneath, exhaust, crossmember, drive shafts etc and the engine will be out.
depending on time and weather will get the back end in the air and drop the rear axle and fuel tank.

sorry about the cr@p pics, dunno whats up with my camera but my mates bringing his tomorrow so should have some better ones.

see if ya can spot me working real hard :lol:

doesnt show but all the seats are out. dash will be next but more important thing first

pic's so far

Image
Image

Image
Image
Image
Image
Image
Last edited by jayrs on Sat Jan 14, 2006 9:46 pm, edited 1 time in total.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Ghost on Sat Jan 14, 2006 9:44 pm

whereabouts you on the IOW mate??

might have to come and see you some time, me parents go there all the time for hols...........down at ST Catherines Point.

looks good BTW mate, you've got me thinking about a Cossie bumper :bonkers:
Image
Ghost
Elite Post Master
Elite Post Master
User avatar
Posts: 7199
Joined: Sun Feb 15, 2004 10:11 pm

Postby jayrs on Sat Jan 14, 2006 9:51 pm

Ghost wrote:whereabouts you on the IOW mate??

might have to come and see you some time, me parents go there all the time for hols...........down at ST Catherines Point.

looks good BTW mate, you've got me thinking about a Cossie bumper :bonkers:


cheers mate, you know cossie bumper is best :lol:
i live center of the island mate in newport, ST Catherines Point is south end of the island, used to live in niton that is only about a mile from st catherines light house, and niton was where the engine hoist had to be picked up from, :lol:

ghost, you done my sig for me didnt ya?
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Ghost on Sat Jan 14, 2006 9:58 pm

jayrs wrote:cheers mate, you know cossie bumper is best :lol:
i live center of the island mate in newport, ST Catherines Point is south end of the island, used to live in niton that is only about a mile from st catherines light house, and niton was where the engine hoist had to be picked up from, :lol:

ghost, you done my sig for me didnt ya?


go into niton often mate, my parents stay at the caravan site at st catherines point..........so we're in and outta there all the time, been to newport as well :Q

nah i didnt do your sig, i did the photoshop that made your decision to do the spliter black :wink:

but its gotta be done like yours i think, jsut without the lights :Q
Image
Ghost
Elite Post Master
Elite Post Master
User avatar
Posts: 7199
Joined: Sun Feb 15, 2004 10:11 pm

Postby jayrs on Sat Jan 14, 2006 10:03 pm

oh yeah i know the place, just down the road from my dads local the buddle inn.

next time ya coming over drop me a PM mate
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Ghost on Sat Jan 14, 2006 10:16 pm

jayrs wrote:oh yeah i know the place, just down the road from my dads local the buddle inn.

next time ya coming over drop me a PM mate


yes mate, always in the Buddle Inn :D

nice little place that, probably seen your dad a few times :lol:

deffo pop you a PM, be suprised if i go with me parents though :lol:
Image
Ghost
Elite Post Master
Elite Post Master
User avatar
Posts: 7199
Joined: Sun Feb 15, 2004 10:11 pm

Postby jayrs on Sat Jan 14, 2006 10:19 pm

:lol: yeah prob seen my old man, good guy my old man, dunno what i would do with out him :)
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby :: blade :: on Sat Jan 14, 2006 11:09 pm

nice hard work there jay mate, liftin a cup up :lol: should look good and go rapid when done. keep it up mate :D

:: blade ::
Drives: Generation 6 Toyota Celica GT
:: blade ::
Elite Post Master
Elite Post Master
 
Posts: 2138
Joined: Tue May 24, 2005 3:32 pm
Location: manchester

Postby jayrs on Sun Jan 15, 2006 10:27 pm

i got a few hours in today so got the engine out.
should have money in my bank this week some time so can start buying up all the bits and bobs for the car, as well as some degreaer as it seems my oil filter was leaking and it was dripping on the drive shaft so the bulk head is covered :lol:

few pics from today

Image
Image
Image
Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Jan 25, 2006 1:08 am

no proper udates at the mo as such, spent weeknd on mainland looking at cars for the wife, but while i was over there i picked up a rear SI bumper and some 16" mondeo alloys for the car when shes done.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Daryld on Wed Jan 25, 2006 9:58 am

good luck on the re build mate looked really nice bfore - r u gunna respray it
'
Image
Daryld
Newbie Poster
Newbie Poster
 
Posts: 20
Joined: Tue Jan 24, 2006 12:40 pm
Location: saffron walden, essex

Postby jayrs on Wed Jan 25, 2006 10:14 pm

cheers mate, yes gunna be resprayed, thanks to some c**t i have a great key mark in the bonnet, plus where ive had stuff sprayed, like delocked doors, bonnet etc, when it fads ( as red does) the new paint shows up as well as under street light, so a new coat of the finest ICI red is going on.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Wes TT on Fri Jan 27, 2006 11:20 pm

lookin good so far mate :Q
Image
Wes TT
Poster
Poster
 
Posts: 166
Joined: Fri Jul 05, 2002 6:36 pm
Location: Isle of Wight

Postby jayrs on Sat Jan 28, 2006 10:48 am

cheers wes, still waiting for the masking tap :bonkers:

i havent done anything to it for last couple of weeks, dunno if im gunna have time this weekend as that black FRST is coming over to be stripped.

got a price for some bits on the engine from a place on the mainland where round where i used to live, cheaper than overhere wes.

crank regind and they supply bigs and mains, £130 (cant remember if its plus vat or not) but ill pay cash :wink:

rebore and they supply pistons, £420, again dunno if its plus vat.

might get the block bored on iow mate, and buy the pistons, that might work out cheaper, but overhere they want £160 just to grind crank :o robbing fookers.

anyhow better get on with something :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sat Jan 28, 2006 9:18 pm

well nothing been done this weekend due to time and the fact its cold as f**k, but i did nip down fords today and got a load of bits up, half or which had to be ordered,

cant remember all the bits off the top of my head but i walked out near on £200 lighter

some other parts were cheaper else where so got them there, E.G new water pump, £22.12 inc vat, dont really think need a new one but for that i might as well fit it.

wont get nothing done sunday as i got a new shed arriving, so need to get that up so i can get the engine in there and strip and once all bored etdc rebuilt, also got 4 alloys to refurb so shed is a must this weekend
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sat Feb 04, 2006 12:30 am

well picked up my new lower front panel and filer repair panel, its not bad but even though its small on the out side ( couple of bubbles) you know its about 3 inch on the inside, so thats coming off.

just found out ford have discontinued the door hinge pins, nice one ford :x

also got the FRST that im breaking, so some spares from that are going over to my car, well the turbo is, some other bits will go in stock
(if anyones after some bits check here http://www.fiestaturbo.com/forums/viewt ... p?t=123155)

still waiting for the other bits from fords to arrive.

engine is being stripped sunday, blocks going in for rebore in the week with some luck, got to call them and make sure they can do it this week that is, head will also have a skim at same time

the crank is going to the mainland to be regorund and shells supplied, i know this sounds weird but it works out over £100 cheaper to have
that place on mainland do it than the place on isle of wight, crazy i know.
best thing is my dads cousin is coming over and he can take it and drop it in to them :) not sure how ill get it back but ill cross that brigde when i come to it :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Feb 08, 2006 12:42 am

update

engine didnt get stripped sunday as i was busy.

its being done this weekend, well sat hopfully as its my kids birthday party sunday so better go to that.

got all my bits from fords now ( well not every thing i need but to date anyway.
thats fitrst pic, second pic contains bits i have in stock that may need doing also when i look.

in the first pic which is all the new stuff ive got last week, it dont look like over £200 worth does it :(

Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Feb 08, 2006 12:42 am

update

engine didnt get stripped sunday as i was busy.

its being done this weekend, well sat hopfully as its my kids birthday party sunday so better go to that.

got all my bits from fords now ( well not every thing i need but to date anyway.
thats fitrst pic, second pic contains bits i have in stock that may need doing also when i look.

in the first pic which is all the new stuff ive got last week, it dont look like over £200 worth does it :(

Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Next

cron

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.