fiestaturbo.com

by **JamieFRST** on Sun Jul 24, 2005 7:08 pm

Right ive got a set of 3.5 mirrors and had them colour coded, whats the best way to cut the door bit out? of got a jig saw and blades for metal...will that do the job?

by **Max M4X WW** on Sun Jul 24, 2005 7:21 pm

I personally find hacksaw's useless for anything if its not a flat surface!

Got a dremmel? I prefer them as they are smaller and you can use a disk then a grinder thing to remove little bits!

by **JamieFRST** on Sun Jul 24, 2005 7:45 pm

I haven't got one, but someone at work has, I was planning on borrowing it anyway to buff up some of my engine bits.

by **Liebo** on Sun Jul 24, 2005 8:02 pm

I agree with Max, dremmel the metal out.

Don't forget to paint the edges to prevent rust setting in!

by **Lawrence** on Thu Aug 11, 2005 3:39 pm

is it possible to fit mk5 headlights, bonnet and wings onto a mk3/.5?

by **Max M4X WW** on Thu Aug 11, 2005 10:44 pm

Dont see why not but its gonna be expensive and nothing will line up!

by **JamieFRST** on Wed Sep 07, 2005 10:16 pm

Ordered a MK5/6 ariel today from Ford cost £12 for all the bits - not bad

by **Max M4X WW** on Thu Sep 08, 2005 12:36 pm

Good o, Still a class mod this. Look so much better!

by **JamieFRST** on Fri Sep 09, 2005 3:52 pm

Is the base and mast all I need? or do I need a weather seal/gasket thing?

by **Max M4X WW** on Fri Sep 09, 2005 11:54 pm

Nope theres no seal AFAIR :-?

Maybe a small rubber one but nothing i paid extra for!

by **bullenb** on Tue Sep 13, 2005 7:01 pm

can anyone helpo me get my mk4 bumper to fit my mk3.5 round the sides it leaves a gap cheers

by **Max M4X WW** on Tue Sep 13, 2005 8:29 pm

Front or Rear?

by **bullenb** on Tue Sep 13, 2005 8:48 pm

rear sorry shouyld of said i know the front would leave gpas round the headlihgts

by **Max M4X WW** on Tue Sep 13, 2005 9:14 pm

Urm Should be ok then. Two bolts + 4screws all fitting ok?

by **bullenb** on Tue Sep 13, 2005 10:03 pm

yeah theirs just a gap on the sid where the bolts go in it doesnt sit flush to the car or slam panels i think their called

by **newportnutcase** on Fri Jan 27, 2006 7:55 pm

hi do the a and b pillers, rear bench and rear door cards fit a mk3 and can [ERRR] 1 tel me the difference between a mk3 mk3.25 and a mk3.5 fiesta if [ERRR]?

by **RS_Raz** on Fri Jan 27, 2006 8:16 pm

Max M4X WW wrote:Good o, Still a class mod this. Look so much better!

I thought the mk5 aerial was cool until someone pointed out that it looks like a remote control car.... they were right.

by **Max M4X WW** on Fri Jan 27, 2006 8:21 pm

Ive shortened mine now :lol:

by **Raymondo** on Fri Jan 27, 2006 9:07 pm

does anyone know if the puma door cards will fit fiestas?

Are they the same as mk4 ones since the dash is the same?

cheers

by **Max M4X WW** on Sat Jan 28, 2006 9:41 am

Wrong shape/size id imagine!

by **Project** on Sat Jan 28, 2006 5:08 pm

Max is right - they seem to have more in common with Escort Mk5 doorcards than the Fiesta.

No way they'd fit properly.

/al

by **Raymondo** on Sat Jan 28, 2006 5:50 pm

Cheers

i realsied this last night after looking at some pics of some. They do appear to be the wrong shape and the speaker grills are in the wrong place aswell as they are at the top of the door.

by **mk3badboy** on Fri Feb 24, 2006 12:33 am

haha i have pretty much an entire mk5 to play with to fit things onto a mk 3 if there is anything else that can be fitted?

[edit] i just read over on fiestaguides.com and according to them i have a mk3.5. hmm i always assumed it was a mk3, how can i tell the difference?

by **fiestasi1800** on Wed May 03, 2006 11:00 am

Random question I know, but is the parcel shelf on a mark 5 different to a mark 3?

by **John_D** on Wed May 03, 2006 11:03 am

if its got a petrol filler cap, clear indicators its a 3.5, if it has'nt its a 3

mk3badboy wrote:haha i have pretty much an entire mk5 to play with to fit things onto a mk 3 if there is anything else that can be fitted?

[edit] i just read over on fiestaguides.com and according to them i have a mk3.5. hmm i always assumed it was a mk3, how can i tell the difference?

by **rich_frst** on Fri Jun 23, 2006 6:08 pm

by **Becks** on Sun Aug 20, 2006 2:22 pm

Have just fitted a ka wiper on the rear, but it wont sit flush to the window, obviously i know the ka's rear window is more rounded than the fez's but has any1 any ideas of how i could make it any better....?
Or have i just put it on a wonk?!! :lol:

Help!

by **Max M4X WW** on Sun Aug 20, 2006 3:25 pm

It wont fit, if you are talking about the end closest to the bolt.

by **Becks** on Sun Aug 20, 2006 3:35 pm

Yeah, thankyou!

Annoying

by **JamieFRST** on Sun Aug 20, 2006 5:40 pm

Ka ones just dont look right, get a mk4

by **festa-1.3** on Sun Aug 20, 2006 7:10 pm

Anyone got a pic of MK4 rear on mk3/3.5 because the one on the first page isn't showing up.

by **Max M4X WW** on Sun Aug 20, 2006 11:11 pm

Will sort them out soon

by **festa-1.3** on Sun Aug 20, 2006 11:55 pm

Cheers mate. I mean the rear wiper. I just read what i typed and i forgot to put wiper after rear. :lol:

by **Becks** on Mon Aug 21, 2006 9:06 am

Awww but i like the ka ones they are smaller than the mk4 ones.

by **:: blade ::** on Mon Aug 21, 2006 5:04 pm

heres a pic of a mk4 rear wiper

fiestaturbo.com

FAQ? Mk4/5 Fiesta Bits onto Mk3.. Ariel, Mirrors, Wipers etc

mk3

Twitter

Facebook

RSS Feeds

What is RSS?