EN Diesel pump solenoids

Problem or technical question?

EN Diesel pump solenoids

Postby louie on Thu Feb 02, 2017 11:48 am

Hi, new here but mostly know what I'm doing....however.

I have a Ford courier, endura de engine and the injection pump went. So changed the pump.

The old pump had a single solenoid/valve on the radiator side face of it's body. The 2nd hand pump has two on the same face. they seen to channel fuel from the input shaft area to the....middle area? or vice versa?

In the course of timing the engine i found that the pump and engine runs with neither of these two solenoids energized.

The old wiring loom has the electrical connection for the single old solenoid that is energized on start up and stays energized at high stationary RPM. I have not tested it at running temperature but the pump has the mechanical cold start timing function so I do not think it is a cold start.

Energizing both or either of the solenoids does not produces any noticeable effects but I can hear both opening and closing.

So, what are they? Should I connect both to the single wire? Just connect the single solenoid that was present on the old pump? Is the pump from a turbo'ed engine and thus maybe will pump too much fuel for my non-turbo....?

Just to clarify the engine runs fine.

Thanks for reading and any help is appreciated.

Regards Louie
louie
Newbie Poster
Newbie Poster
 
Posts: 1
Joined: Wed Feb 01, 2017 12:03 pm
Your car: Ford courier

cron

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.