Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Post pics of your Fiesta here.

Re: Cookie's Mk3.5 Fiesta RS1800 UPDATE 16/01/2015

Postby FRSJON on Tue Jan 20, 2015 11:32 pm

love this pic :)

Image
Image
FRSJON
Elite Post Master
Elite Post Master
User avatar
Posts: 4662
Joined: Mon Oct 30, 2006 10:26 pm
Location: ISLE OF WIGHT
Your car: frozen white/carbon zt

Re: Cookie's Mk3.5 Fiesta RS1800 UPDATE PAINTED 16/01/2015

Postby RS1800-Cookie on Sat Feb 07, 2015 8:47 pm

Hi all,

its been a little bit of time since i posted. I have been busy with family matters, i have been fighting to see my two kids for over a year now and finally got to see them :D

Between this and working copious hours to fund my car I have managed to get bits done. I was not happy with the dash layout. So this has been customised. I was not happy with the position the the gearstick..... So this has been modified too..... sense a theme here? :lol:

So the dash.... well i wanted a more fitted dash to the driver. I make no excuses my inspiration came from being in my truck :-? i decided to bring the dials closer towards the steering wheel and to wedge the centre console so it face the driver. the reason for this is to make reaching switches etc easier while in harnesses

here is the dash in progress. i know it looks crude atm hopefully this shows the shape tho. This will be prepped and flocked once finished.
Image

Image

The quickshift was a pain to change gear with the seat in .... I decided i wanted to raise the the stick in a box to allow 1. clearance from the seats and 2. a shorter reach from the wheel :Q

Image

Image

While playing with these bits i have been shopping :D :D :D LOTS!!!

The engine is finally home and now ready for me to finish building. I have fitted the AT throttles and Bosch 470cc injectors!

Image

I have bought a Kent Cams timing belt, full tensioner and pulley kit andnew cam pulley bolts. I also got some stainless studs and nuts for the inlet and brass nuts for the exhaust.

I have also bought a Dry sump tank, AN12 fittings and Stainless braided oil line for my dry sump system. heres a pic of my tank
Image

I have also bought new indicator lenses, A lifeline 2000 plumbed in fire extinguisher and handheld for front.

Hopefully the engine will be subject to the engine test bed dyno soon ready to install in the car later on. Once the car is somewhat ready I will be starting the Gearbox build, to which i've decided to fit a Quaife ATB diff.
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Mk3.5 Fiesta RS1800

Postby RS1800-Cookie on Sat Feb 07, 2015 8:56 pm

also bought a plate for the car 8) 8)

Image


sorry will have to wait til its done for that hehehe!
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby RS1800-Cookie on Sun Feb 15, 2015 10:26 pm

Just a quick update... here is a pic to show the layout of custom dash, gearshift tunnel Dropped steering coloum and seating arrangement

Image

Image

The engine is back home, had one drama in the fact the dry sump scavenge pump was in the wrong location que modifying! Lol

Image

Image

Image

Next stop to the engine dyno to bed in and see how many ponies it makes.

Also mounted my lifeline fire extinguisher

Image

Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby minirotty on Mon Mar 02, 2015 10:14 pm

Love it 8)
minirotty
Newbie Poster
Newbie Poster
 
Posts: 20
Joined: Fri Dec 08, 2006 8:12 pm

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby FRSJON on Tue Mar 03, 2015 7:11 pm

awesome matt :)
Image
FRSJON
Elite Post Master
Elite Post Master
User avatar
Posts: 4662
Joined: Mon Oct 30, 2006 10:26 pm
Location: ISLE OF WIGHT
Your car: frozen white/carbon zt

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby RS1800-Cookie on Fri Mar 20, 2015 12:06 pm

Dropped engine in to make the loom and mock fit parts..Image

Image
More bits modified... The wiper is now located on the nearside to allow more space for longer rampipes eventuality
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby Excursion on Tue Mar 31, 2015 9:14 am

Looking forward to seeing what the engine makes. What will it rev to?
Excursion
Bulletin Board User
Bulletin Board User
User avatar
Posts: 15265
Joined: Thu Jan 01, 1970 1:00 am
Location: Skynet
Your car: Ford Fiesta

Car: 1990 Ford Fiesta XR2i

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby RS1800-Cookie on Tue Mar 31, 2015 10:50 pm

The engine is gonna be somewhere between 250 and 300 bhp tho there is room to develop it further From what ever figure it reaches.

The cams come in at 3000 and off at 8400 but should be okay to 9000 that's on standard oil pump too dry sumped.

Depending on where peak torque is will determine my rev limiter.

Cars on hold atm. Just bought a house... but has a big workshop with an inspection pit so will soon be back in progress.sadly tho due too funds etc and time I think ford fair is a no go.. too ambitious maybe.
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Mk3.5 Fiesta RS1800 Update 15/2/15

Postby RS1800-Cookie on Sun Aug 09, 2015 11:30 pm

Hi everyone :)

Its been a while since I have posted. several reasons.... firstly me and my partner have BOUGHT! a house :Q but its made for us, when i say us i mean me really hehehe it has a 25ft x 23ft workshop! cue the new mancave and home for my fiesta.

House renovation has been taking priority over the car :( but i have been tackleing bits where i can.

First off the car got moved, was not easy to move everything. due to the ammount of stripped bits ive decided to reassemble the car to figure out what i need, what i have to do and what i'm missing!

I have recently delt with the dry sump issues, the pump could not be located anywhere else, so I nabbed the position from the trolley and dare I say it copied it :D cheeRS Luke! :)

Image
Image

Image

Image


Image

I put the carbon roof on CheeRS Raj top man! :D

Image

Image

Image

i have cut the rear bumper short, and put tailgate back on temporarly while fitting both seat, helmet hammock and harnesses.

Image

Image

Image

Image

New wheels 16" Compomotive FR 8J with dunlop dirrezza dz02g track tyres, rare as hens teeth too!

Image

Image

the next issue is too finish the rear subframe No2 ... :) still independant but slightly different. Oh and fully rose jointed! ..... Sooooo that will now mean the whole car is rose jointed ! gonna be bumpy me thinks!

toying with some livery for the car, as it rally car inspired.... thoughts suggestions comments???

Image

Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie's Fiesta - full out rally car! Update 9/8/15

Postby RS1800-Cookie on Sun Nov 22, 2015 6:47 pm

Been a while since i posted, not alots happened as short on funds difficult times :( contemplaited selling it all but somehow its still here. I wasnt happy with the seats so i got a set of proper corbeau revolutions and have mounted them in fixed positions. the steering wheel position was awful so i have built a new column to allow better position and also allowed me to mount seat as far back as possible for weight distribution. Ive fitted the areocatches to the bonnet i tried the comp FR's to the car, they were a tad too wide with offset and width.... the solution ... modify the car! so i have made custom bodykit plugs ready to make a 1 off bodykit, as a result the bumpers have had to be cut and widened. the rear arches have been cut by about 3 inches and now give the whole wheel room to travel. didnt like the dash, threw it and started again. custom dash now being made. ive made a jig and remade the maxi axle now fully rose jointed.

on a plus new job 4 on 4 off, good money... theres hope to finish by july next year for ford fair, heres are a few pics of stuff thats gone on.

Image
Image
Image

Image

Image
Image

wider by 1.3/4 inch each side
Image

Image

Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby Ruaraidh on Mon Nov 23, 2015 1:23 am

Just read through this entire thread.. Amazing work! So cool to see someone doing something different! It looks great can't wait to see this finished! What do you think the independant rear suspension will be like?
Ruaraidh
Newbie Poster
Newbie Poster
 
Posts: 30
Joined: Tue Jul 30, 2013 10:40 pm
Your car: Fiesta Xr2i

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Mon Nov 23, 2015 8:06 pm

Thanks, not one to shy from a challenge and as you say it will be different from others.

I think the maxi rear beam is going to be great on track as will prevent inner wheel lift and more control x corner weights.
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Sat Nov 28, 2015 1:52 am

Started the fabrication of my custom fibreglass dash. using 300g woven roving fibreglass for strength.

the cloth prior too resin
Image

during
Image

Image

after
Image

had to modify the kit i made, was a tad too wide and didnt look right over wheels. now to finish and prep to mould with 2x2 twill fibreglass cloth.

Image

this is the twill cloth that I will make the kit from
Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Sun Dec 06, 2015 8:57 pm

was doing a spot of cleaning in the mancave today and took a few cheeky pictures of the car outside. cant wait to paint this. im very pleased with how the custom kit has turned out :D

Image


Image

Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Thu Feb 18, 2016 10:01 am

It's been a long time since any update to this thread.

So what gone on and what's changed... lol

*The cars now painted by me. This time its better.

Image

Image


* it's now got a MTX 75 FRS gearbox and linkage meaning b&m has gone.

* the pedels are now installed on sliders

*dash has been flocked

Image

Image

There's a few more bit going on like bits being made etc but atm it's looking tho it could be done for ford fair this year!
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby Excursion on Wed Feb 24, 2016 4:34 pm

Great work. Seems like a good project for learning and refining skills.
Excursion
Bulletin Board User
Bulletin Board User
User avatar
Posts: 15265
Joined: Thu Jan 01, 1970 1:00 am
Location: Skynet
Your car: Ford Fiesta

Car: 1990 Ford Fiesta XR2i

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby Ruaraidh on Sun Feb 28, 2016 11:13 am

Your car is looking great! When you were still using the bc gearbox, how did you make the gear linkage work after raising the height of the tunnel where the gear stick mounted?
Ruaraidh
Newbie Poster
Newbie Poster
 
Posts: 30
Joined: Tue Jul 30, 2013 10:40 pm
Your car: Fiesta Xr2i

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Fri Mar 04, 2016 12:06 am

I chopped the bar and modified so as to follow the contour of the tunnel. the bar did pivot side to side as no joints were fitted.
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby RS1800-Cookie on Wed Mar 13, 2019 2:38 pm

well its been 3 years since i posted news.... so here we have it. its almost finished. alot has changed.

Image

Image

Image

Image
RS1800-Cookie
Poster
Poster
 
Posts: 142
Joined: Sun Jan 12, 2014 12:25 pm
Your car: ford fiesta RS 1800

Re: Cookie F2 RSF MK3.5 Fiesta (escort maxi rally car inspired)

Postby Bobson on Fri Jun 28, 2019 8:15 am

Amazing project, good job!
Bobson
Newbie Poster
Newbie Poster
 
Posts: 2
Joined: Mon Oct 19, 2015 7:56 am
Your car: ST220 & XR2i

Previous

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.