2.0 Zetec into 1.6 Si - full conversion guide.

by **mikeysabes** on Thu Nov 30, 2006 3:43 pm

ok, now youve gone and confused me again !

you do enough of that on MSN LOL

theres one of them LSD things on ebay for £50 buy it now ?

what will this LSD do ? and is there a certain one i need, or simply an escort LSD box

by **Smo** on Thu Nov 30, 2006 4:32 pm

You're the one who said you wanted an RST box :lol:

by **mikeysabes** on Thu Nov 30, 2006 4:42 pm

damn,

i only said that because i was told to get one lol

he did say about the LSD though, but i didnt have a clue what one of them are about

by **rst in progress** on Mon Dec 18, 2006 12:30 am

can anyone shed abit more light on the imobilisers? im looking at buying an m regsi to put my 2.0 into but need to know if il have issues with the imobiliser? cheers

by **lucasdemoley** on Tue Dec 19, 2006 1:13 pm

Imobiliser is fine. Just you have to use the right ecu (its listed in this topic the right ones) and you wont have a problem.

by **rst in progress** on Fri Dec 22, 2006 1:37 am

i made a start today taking all the crap of the mondeo engine i.e water pump, old tensioners, timing belt, plugs, leads etc etc and fitted new so no i just need to bolt on power steering pump and alternator, im looking forward to getting the engine in, im hoping it will be fast and pull well, ive spent time modifying the 2.0 throttle body to increase the air flow so fingers crossed itwill be running sat when i go for it

by **lucasdemoley** on Sat Dec 23, 2006 7:39 pm

I remember geting all excited when doing mine! What clutch are you planning to use? I used I 1.6 sports one but its already started slipping abit when excellerating hard out of 30 mph zones in second ect, had the engine in about 6 months.

Anyone know of the best clutch to use if i have to change mine?

by **rst in progress** on Mon Dec 25, 2006 4:57 pm

ive gone with a standard 1.816v clutch, hope it will cope but idont know how torquey these engines are? lol

by **Emlyn11** on Thu Jan 11, 2007 11:38 pm

does anyone know if gearbox and diff oil is seperate or the same?
as im doing my conversion in the next few weeks hopefully and
need a consumables list

by **Emlyn11** on Fri Jan 12, 2007 4:51 pm

dont worry i know now :lol:

by **mad4mp3z** on Fri Jul 24, 2009 9:05 am

hi, i have got myself a nifty wee mk 3.5 1.4 Si and i was wondering if the 2.0 zetec swap job talked about in this thread will be the same as doing it on 1.6 Si as i intend on buying a full mondeo for doner parts. and info will be greatly apreciated :D:D

by **lucasdemoley** on Mon Jul 27, 2009 2:42 pm

I'm pretty sure you need to do the cvh conversion which is discussed in another guide.

by **mad4mp3z** on Tue Jul 28, 2009 1:07 pm

cheers dude , il take a look about and c if i can dig it up, whats the thread called so if i cant find it it will be easyer to locate

think i found it, this the 1 you meen?? 1-6-8v-cvh-2-0-16v-zetec-engine-conversion-new-06-04-07-vt92943/

by **THEHOG~** on Mon Nov 16, 2009 2:06 pm

This may seem a stupid question. For any guys with a 2 litre convertion.

In the 2litre convertion do you use 1.6 gaskets with the 1.6 oil pump/water pump and sump or do you use 2 litre gaskets.
or are the gasket on the 1.6 and 2 litre the same ?

by **lucasdemoley** on Thu Nov 19, 2009 2:40 pm

Good question, I think I used the 1.6 items but they were the same/ very similar to the 2.0 items. Was a while ago that I did it though.

by **THEHOG~** on Thu Nov 19, 2009 7:09 pm

thanks m8 i will go for the 1.6 gear.
thanks

2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.

Re: 2.0 Zetec into 1.6 Si - full conversion guide.