G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Parts and accessories for sale.

G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Thu Jul 03, 2008 3:30 am

breaking my 1989 mk3 ford fiesta 1600s,
it was going to be a complete restoration project but due to change of mind and now wanting a mitsubishi pajero for some offroading and more garage space it has to go.... :cry:

most of the items available:

2 piece 4 branch exhaust manifold for cvh xr2i etc £40
28/32 tldm carb and manifold + modded std airbox £30
stainless steel 4 inch rolled out tailpipe for mk3 fiesta came of xr2i and comes with mounting bracket and rubber £40
central locking, ignition, elec windows and boot relese components for 3 door fiesta inc handles, keys, switches etc £60
std cvh exhaust manifold+downpipe £10
max power gearknob (polished) £15
engine mount good condition £10
ford xr2i? steering wheel £20
dashboard £15
centre console in red/black £15
indicator stalk assy. etc £10
std rear lights £10
boot ok condition needs minor work £10
drivers headlight £5
bare doors ok condition £10 each
bonnet swage line smoothed needs finishing £10
interior clips bolts seatbelts panels etc etc just let me know what you need
heated rear screen slight green tint £10
side rear windows slight green tint £10
side front windows slight green tint £10
air blower unit inc fan matrix etc £15
front aftermarket bumper unknown make £15
std rear bumper £5
fuel cap vgc + key £10
front wiper motor £5
rear wiper motor £5
13" xr2 alloys x 4 ideal trackday ok tyres £30
seats front and back £10
wing mirrors £5
sports xr2i? steering rack £20
radiator and fan ok condition £5
1.6 carb'd cvh leanburn engine pm me for details
5 speed gearbox, (briefly cleaned) inc gear linkage, cv joints and new oil, shifted gears smoothly comes with mounting bolts and plates etc £60
starter motor £20
alternator £15
amber indicators £5
rear drums etc £10
brake servo £15
master cylender £10
clutch cable fairly new £5
throttle cable good condition £5
wiring loom ££?? pm me
fuel tank inc lines and neck £25
calipers and vented discs xr2i etc (ideal upgrade) £15
brake lines complete £15
acc. brake and clutch pedals assy. £10
rear top spoiler £10
lower spoiler £10
rear beam £20
front anti roll bar £10
x2 wishbones+ hubs inc ball joints etc ok condition £10
x4 shocks could do with paint £20
semi-complete bare shell £80 not inc registration :-? will pm you for shell condition details if your interested
or if it dosnt sell i can chop bits out of the shell if you need repair panels etc let me know what you want

ive probibly missed loads out and the prices are off the top of my head but i cant keep my eyes open anymore lol
most parts are in very good condition, please ask what you want and ill post up some pics and prices etc..
or if you want to take the whole lot of my hands then make me an offer as id much rather it be rebuilt instead of beeing scraped as it was my grans car and has good charicter?? :-? :lol:
forgot to mention the registration reads G776 CAB for you cabriolet owners 8) but ive never sold a plate/registration before so youl have to fill me in how to do so?

i will accept sensible offers on everything

cash on collection preferred from somerset or paypal or cheque etc
and can poss arrange postage for some items or local delivery

happy living to all :)
Attachments
fiesta.JPG
this is how i got it, since it has been striped and rusty areas started work on including wings, f/r valences, front light pannel, filler cap panel and arches, so looks a bit more sorry for itsself at the moment...all the parts apart from the shell wich is by all means repairable are in good condition
Last edited by andymoto on Thu Jul 03, 2008 10:18 pm, edited 2 times in total.
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby sjoyce666 on Thu Jul 03, 2008 8:48 am

Where abouts in Somerset are you ?

Scott
sjoyce666
Elite Post Master
Elite Post Master
 
Posts: 2199
Joined: Fri Apr 19, 2002 11:58 am
Location: Yeovil, Somerset

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Thu Jul 03, 2008 12:51 pm

hello mate I am Located near Yeovil

hope this helps!
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby sjoyce666 on Thu Jul 03, 2008 2:46 pm

PM Sent

Scott
sjoyce666
Elite Post Master
Elite Post Master
 
Posts: 2199
Joined: Fri Apr 19, 2002 11:58 am
Location: Yeovil, Somerset

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Fri Jul 04, 2008 1:36 am

wheels provisionally on hold!!.....
Last edited by andymoto on Fri Jul 04, 2008 6:06 pm, edited 1 time in total.
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Fri Jul 04, 2008 2:26 am

4 branch manifold provisionally sold.... :cry:
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Fri Jul 04, 2008 2:22 pm

if anyone wants anything seperatly or a mix and match just ask i need everything gone!!!
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Wed Jul 09, 2008 6:54 pm

bump
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby HCS PIMP on Thu Jul 10, 2008 2:55 pm

zorst sound v tempting to me :P
2.1 Went BANGGGGG now a Ghia 1800
HCS PIMP
Elite Post Master
Elite Post Master
 
Posts: 1642
Joined: Sat Nov 19, 2005 10:46 pm
Location: leeds / gt harwood

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby Si_2000 on Thu Jul 10, 2008 7:27 pm

how much for the whole thing. how much work will it take to get it back on the road. my first car was a 1.6s rep so a real one i think is the next step.
Image
Si_2000
Poster
Poster
 
Posts: 106
Joined: Sat Jan 05, 2008 5:48 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby andymoto on Sat Jul 12, 2008 5:15 am

sorry to everyone who wanted parts.... as you know i wanted to sell it whole if possible, and si_2000 is the new potensial buyer who will hopfully be working his magic :D on it if the sale goes through..... if not for some reason i will be forced to break it.... so watch this space....
sorry for any inconvenience.....

happy living.....

andy
andymoto
Poster
Poster
 
Posts: 54
Joined: Tue Apr 22, 2008 10:52 pm

Re: G776 CAB Fiesta mk3 cvh 1600s parts/breaking must go!!!

Postby Hustle-2010 on Fri Sep 03, 2010 8:03 am

Do you still have the light laden valve found under rear of car by the axle for brakes, it's 2 pistons with 2 paddles in between has spingd at each end. If have email or mob mum I can send a pic of it. Cheers
Hustle-2010
Senior Poster
Senior Poster
 
Posts: 240
Joined: Sun Jun 27, 2010 9:39 pm